Technicolor Connected Home USA LLC H44-100 Benutzerhandbuch

162

DIRECTV

 HD

 DVR

 RECEIVER

 USER

 GUIDE

SATELLITE IN 1 – Connect one line from your satellite dish here. A Single Wire Multi-Switch (SWM) connection, if applicable, is 

made to this satellite in port.
SATELLITE IN 2 – Connect the second line from your satellite dish here.
S-VIDEO OUT – A Standard-Definition video output.
RCA-Audio/Video Jacks – Standard-Definition output. You can use the entire row of RCA connectors (yellow, white and red) to 

feed a VCR or DVD player/burner. 
COMPONENT VIDEO OUT – Use this block to connect up component video cables (green, blue, red); use the white and red RCA 

connectors below it for analog audio out. These connectors provide an HD picture, but do not support 1080p or 3D.
DIGITAL AUDIO OUT COAXIAL – Use this digital audio connection for sound.
DIGITAL AUDIO OUT OPTICAL – Use this digital audio connection for sound.
HDMI – Use this combination digital video and audio connector for the best picture quality. This is the recommended 

ETHERNET – Please refer to Appendix 4 for information on networking options on your HD DVR before connecting anything to 

the Ethernet port.
USB – For future use. USB 2.0 Host (FRONT/REAR EACH 5V = 500mA)
SATA – Use this connector to add an external hard drive to your Receiver.

 PHONE JACK – Connect your phone line here to enable Pay Per View purchasing and Caller ID (if your phone service package 

includes it).

 POWER – Your Receiver must be plugged in at all times to function properly.

 IR RECEIVE – Connect an IR (infrared) extender or repeater here when your Receiver is in a cabinet or otherwise not “visible” 

to your remote control.