Technicolor Connected Home USA LLC TCA200 Benutzerhandbuch
60
Table 11: System & Security Settings, Ranges, and Defaults.
Feature
Comments
Ranges & Defaults
Exit Delay
The time allotted for the customer to exit the
premises when the security system is armed.
The Exit Delay for Arm Stay and Arm Night modes is
twice the configured Exit Delay up to 120 seconds.
premises when the security system is armed.
The Exit Delay for Arm Stay and Arm Night modes is
twice the configured Exit Delay up to 120 seconds.
Default: 60 seconds
Range: 45 seconds to 240
seconds
Range: 45 seconds to 240
seconds
Exit Delay Progress
Annunciation
Annunciation
TouchScreen beeps once per second. Twice/second
during the last 10 seconds.
during the last 10 seconds.
Disabled for Arm Stay &
Arm Away.
This feature is not
configurable.
Arm Away.
This feature is not
configurable.
Exit Delay Restart
Entry/Exit zone is faulted, restored and then faulted
again prior to the end of the exit delay, then Exit
Delay restarts.
again prior to the end of the exit delay, then Exit
Delay restarts.
One time only.
This feature is not
configurable.
This feature is not
configurable.
Exit Error
If an Entry/Exit door is left open at the end of Exit
Delay, the Entry Delay starts and, if the system is
not disarmed, an alarm sounds.
Delay, the Entry Delay starts and, if the system is
not disarmed, an alarm sounds.
This feature is not
configurable.
configurable.
Unvacated Premises During Arm Away, if no Entry/Exit Zone opens and
closes during the Exit Delay, the Arming Mode
reverts to Armed Stay.
reverts to Armed Stay.
This feature is not
configurable.
configurable.
Entry Delay
The time allotted for the customer to disarm the
system after tripping an Entry/Exit security zone.
system after tripping an Entry/Exit security zone.
Default: 30 seconds
Range: 30 to 240 seconds
Range: 30 to 240 seconds
Entry Delay Progress
Annunciation
Annunciation
TouchScreen beeps once per second Twice/second
during the last 10 seconds.
during the last 10 seconds.
This feature is not
configurable.
configurable.
Disarm
Enter a keypad code to disarm the system.
This feature is not
configurable.
configurable.
Control Buttons
Home button
The functions of these
buttons cannot be
changed.
buttons cannot be
changed.
Emergency Alarm button
Emergency Alarms
(aka manual alarms)
(aka manual alarms)
TouchScreen:
Press to access
Emergency Alarm
options
Press to access
Emergency Alarm
options
The functions of these
buttons cannot be
changed.
buttons cannot be
changed.
Alarm Transmission
Delay
(aka Abort Window)
Delay
(aka Abort Window)
Length of time after an alarm sounds for the
customer to enter a valid keypad code to prevent
alarm from being sent to central.
customer to enter a valid keypad code to prevent
alarm from being sent to central.
Default: 30 sec.
Range: Minimum is 15 sec.
and the maximum is 45
sec.
Range: Minimum is 15 sec.
and the maximum is 45
sec.
Disarming During
the Alarm
Transmission Delay
the Alarm
Transmission Delay
System disarmed by entering a valid keypad code in
the TouchScreen or a key pad. If invalid keypad
code entered, alarm restarts.
the TouchScreen or a key pad. If invalid keypad
code entered, alarm restarts.
This feature is not
configurable.
configurable.
When alarms are
successfully aborted
successfully aborted
If system is disarmed within the Alarm Transmission
Delay period, no alarm transmission occurs.
Delay period, no alarm transmission occurs.
By default, verify contacts
are notified by SMS and
are notified by SMS and
TouchScreen User's Guide