Thomson 2-5912AH Benutzerhandbuch

Your telephone equipment is approved for connection to the Public Switched Telephone Network 

and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical 

Requirements for Telephone Terminal Equipment published by ACTA.
1  Notification to the Local Telephone Company

On the bottom of this equipment is a label indicating, among other information, the US 

number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, 

provide this information to your telephone company.
The REN is useful in determining the number of devices you may connect to your telephone 

line and still have all of these devices ring when your telephone number is called. In most (but 

not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To 

be certain of the number of devices you may connect to your line as determined by the REN, 

you should contact your local telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone 

network must comply with the applicable FCC Part 68 rules and requirements adopted 

by the ACTA. A compliant telephone cord and modular plug is provided with this product. 

It is designed to be connected to a compatible modular jack that is also compliant. See 

installation instructions for details.
Notes  
• This equipment may not be used on coin service provided by the telephone company.
• Party lines are subject to state tariffs, and therefore, you may not be able to use your own 

telephone equipment if you are on a party line. Check with your local telephone company.

• Notice must be given to the telephone company upon permanent disconnection of your 

telephone from your line.

• If your home has specially wired alarm equipment connected to the telephone line, 

ensure the installation of this product does not disable your alarm equipment. If you have 

questions about what will disable alarm equipment, consult your telephone company or a 

qualified installer.

1. Locate battery and battery door which are packaged together inside a plastic bag 

and are separate from the handset.

2.  Locate the battery compartment on the back of the handset.
3.  Plug the battery pack cord into the jack inside  the compartment.

6.  Allow the phone to charge for 16 hours prior to first use. If you don’t properly 

charge the phone, battery performance is compromised. 

1.  Turn the base over.
2.  Attach the wall mounting pedestal by first inserting the tabs on the open edge of 

the pedestal into the slots on the lower portion of the bottom of the base. Then 

push down and snap the pedestal into place.

3.  Slip the mounting holes (on the back of the base) over the wall plate posts, and 

slide the unit down into place. (Wall plate not included.)

The phone is 

ON when the TALK/END indicator on the handset and the charge/in use 

indicator on the base is lit. 

The handset and 

base 

indicators

 flash when you receive a call.

The phone is 

ON the charge/in use indicator on the base is lit. 

The handset  visual ringer

 

and base 

indicator

 flash when you receive a call.

1.  When the phone rings, pick up the handset and press the TALK/END button.
2.  When finished, press the TALK/END button again or place the handset on the base 

cradle to hang up.

1.  Pick up the handset and press the TALK/END button. Wait for the dial tone. The call 

timer starts counting minutes and seconds in the display.

2.  Dial a telephone number.
3.  When finished, press the TALK/END button again or place the handset on the base 

cradle to hang up.

While the phone is 

ON, press the 

redial

 button to redial the last number you dialed (up 

to 32 digits).

Use the 

flash

 button to activate custom calling services such as call waiting, which 

are available through your local phone company.

While talking on the phone, it may be necessary for you to manually change the 

channel to improve reception and reduce noise or static on the line. Press and release 

the 

chan

 button to move to the next clear channel.

This feature assists in locating a misplaced handset.
Press the page button on the base. The handset beeps continuously for about 2 

minutes until you press the TALK/END button on the handset or the page button on 

the base.

Make sure the phone is 

OFF (not in talk mode).

1. Press the r-tone button.
2. Use the  touch-tone pad 1, 2, or 3 to select ringer tone 1, 2, or 3. You will hear the 

selected ring tone.

3. Press ther-tone button to save your selection. You will hear a confirmation tone.

The ringer on/off switch is located on the side of the handset.

When the phone is 

ON press the  

VOLUME (5or6)

 button to adjust the listening level. 

Choose from 

five

 volume settings. 

Use mute during a phone conversation to speak privately and off-line with a third 

party.
1.  Press the 

mute

 button. MUTE shows in the display. The party on the telephone will 

not hear you.

2.  Press the 

mute

 button when finished.

Each handset can store up to ten 20-digit numbers in memory for quick dialing. 

1.  Make sure the phone is 

OFF (not in TALK mode).

2.  Press the 

mem

 button.

3.  Press the desired memory location (0 through 9).
4.  Press the 

mem

 button again.

5.  Use the touch-tone pad to enter the telephone number you want to store (up to  

20 digits). 

6.  Press 

mem

 again to store the number. You will hear a confirmation tone.

1. Repeat steps 1 through 4 in Storing a Name and Number in Memory.
2. Press the 

redial

 button.

3.  Press the 

mem

 button to store the number. You will hear a confirmation tone.

If a pause is needed to wait for a dial or access tone, press the 

#PAUSE 

button to 

insert a delay in dialing sequence of a stored number (for example, after you dial 9 for 

an outside line, or to wait for a computer access tone.) pause shows in the display as 

a 

P, and each pause counts as one digit in the dialing sequence.

Use the same procedure to change a stored number as you do to store a number, just 

replace the old phone number with the new one.

1.  Make sure the phone is 

OFF (not in TALK mode).

2.  Press the 

mem

 button.

3.  Press the desired memory location (0 through 9).
4.  Press the 

mem

 button twice.

1.  Make sure the phone is 

ON by pressing the TALK/END button.

2.  Press the 

mem

 button.

3.  Press the memory location (0-9). The number dials automatically.

Use this feature to make calls which require a sequence of numbers, such as calling 

card calls to a frequently called long distance number. Each part of the sequence is 

dialed from memory. The following example shows you how to use chain dialing to 

make a call through a long distance service:
The Number For 

Long distance access number 

7

Authorization code 

8

Frequently called long distance number 

9

1.  Make sure the phone is 

ON.

2.  Press the 

mem

 button and then press 7.

3.  When you hear the access tone, press the 

mem

 button and then press 8.

4.  At the next access tone, press the 

mem

 button and then 9.

Make sure the telephone is 

OFF (not in TALK mode) before you replace battery.

1.  Remove the battery compartment door.
2.  Disconnect the battery plug from the jack inside the battery compartment and 

remove the battery pack from the handset.

3.  Insert the new battery pack and connect the cord to the jack inside the battery 

compartment.

4.  Put the battery compartment door back on.
5.  Place handset in the base to charge. 

•  Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, 

toxic materials could be released which can cause injury.

•  To reduce the risk of fire or personal injury, use only the 

battery listed in the User’s Guide.

•  Keep batteries out of the reach of children.
•   Remove batteries if storing over 30 days.

10330 North Meridian Street

Indianapolis, IN 46290

© 

2006 Thomson Inc. 

Trademark(s) ® Registered

Marca(s) Registrada(s)

Model 25912 

0001XXXX (Rev. 0 Dom E) 

06-50 

Printed in China

To use this phone, you need an RJ11C type modular telephone 

jack, which might look like the one pictured here, installed in 

your home. If you don’t have a modular jack, call your local 

phone company to find out how to get one installed.

Your cordless phone uses a digital security system to protect against false ringing, 

unauthorized access, and charges to your phone line.

•  Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave 

ovens, heating appliances and direct sunlight.

•   Avoid areas of excessive dust, moisture and low temperature.
•   Avoid other cordless telephones or personal computers.
•  Never install telephone wiring during a lightning storm.
•  Never install telephone jacks in wet locations unless the jack is specifically 

designed for wet locations.

•  Never touch non-insulated telephone wires or terminals, unless the telephone 

line has been disconnected at the network interface.

•  Use caution when installing or modifying telephone lines.

SEE MARKING ON BOTTOM / BACK OF PRODUCT

RISK OF ELECTRIC SHOCK

            DO NOT OPEN

WARNING: TO

PREVENT FIRE OR

ELECTRICAL SHOCK

HAZARD, DO NOT

EXPOSE THIS

PRODUCT  TO RAIN

OR MOISTURE.

THE LIGHTNING

FLASH AND ARROW

HEAD WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

“DANGEROUS

VOLTAGE” INSIDE

THE PRODUCT.

CAUTION: TO REDUCE THE

RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR

BACK). NO USER

SERVICEABLE PARTS INSIDE.

REFER SERVICING TO

QUALIFIED SERVICE

PERSONNEL.

THE EXCLAMATION

POINT WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU  OF

IMPORTANT

INSTRUCTIONS

ACCOMPANYING

THE PRODUCT.

•  See solutions for “No dial tone.”

You experience static, noise, or fading in and out

•  Change channels
•  The handset may be out of range. Move closer to the base.
•  Relocate the base.
•  Charge the battery.
•  Make sure base is not plugged into an electrical outlet with another  

household appliance.

Unit beeps

•  Place handset in base cradle for 20 seconds to reset the security code. If that 

doesn’t work, charge the battery for 16 hours.

•  See solutions for “No dial tone.”
•  Replace the battery.

Memory dialing

•  Make sure you correctly program the memory location keys.
•  Make sure you follow the proper dialing sequence.
•  You may need to reprogram numbers into memory after a power outage or  

battery replacement.

Out of range

•  Move closer to the base.
•  Reset the battery. Unplug the battery and plug it in again after five seconds.
•  Reset the power supply. Unplug the supply and plug it in again after five 

seconds.

•  Aluminum siding.
•  Foil backing on insulation.
•  Heating ducts and other metal construction can shield radio signals.
•  You’re too close to appliances such as microwaves, stoves, computers, etc.
•  Atmospheric conditions, such as strong storms.
•  Base is installed in the basement or lower floor of the house.
•  Base is plugged into an AC outlet with other electronic devices.
•  Baby monitor is using the same frequency.
•  Handset battery is low.
•  You’re out of range of the base.

To keep your telephone working and looking good, follow these guidelines:

•  Avoid putting the phone near heating appliances and devices that generate 

electrical noise (for example, motors or fluorescent lamps).

•  DO NOT expose to direct sunlight or moisture.
•  Avoid dropping and other rough treatment to the phone.
•  Clean with a soft cloth and never use a strong cleaning agent or abrasive 

powder because this will damage the finish.

•  Retain the original packaging in case you need to ship the phone at a later date.

If trouble is experienced with this equipment, for repair or warranty information, please contact 

customer service at 1

-800-448-0329. If the equipment is causing harm to the telephone 

network, the telephone company may request that you disconnect the equipment until the 

problem is resolved.
This product may be serviced only by the manufacturer or its authorized service agents. 

Changes or modifications not expressly approved by 

Thomson Inc.

 could void the user’s 

authority to operate this product. For instructions on how to obtain service, refer to the warranty 

included in this guide or call customer service at

Or refer inquiries to: 

Thomson Inc.

 

Manager, Consumer Relations 

P O Box 1976 

Indianapolis, IN 46206
Attach your sales receipt to the booklet for future reference or jot down the date this product 

was purchased or received as a gift. This information will be valuable if service should be 

required during the warranty period.
Purchase date  ________________________________________________   

Name of store  ________________________________________________

Should your equipment cause trouble on y our line which may harm the telephone network, 

the telephone company shall, where practicable, notify you that temporary discontinuance of 

service may be required. Where prior notice is not practicable and the circumstances warrant 

such action, the telephone company may temporarily discontinue service immediately. In 

case of such temporary discontinuance, the telephone company must: (1) promptly notify you 

of such temporary discontinuance; (2) afford you the opportunity to correct the situation; and 

(3) inform you of your right to bring a complaint to the Commission pursuant to procedures 

set forth in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities, equipment, 

operations or procedures where such action is required in the operation of its business and 

not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the 

use or performance of your telephone equipment, the telephone company must give you 

adequate notice, in writing, to allow you to maintain uninterrupted service.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 

conditions: (1) This device may not cause harmful interference; and (2) This device must accept any 

interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 

used in accordance with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation.

Privacy of Communications may not be ensured when using this product.

If this equipment does cause harmful interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is 

“receiving” the interference).

• Reorient or relocate and increase the separation between the telecommunications equipment 

and receiving antenna.

• Connect the telecommunications equipment into an outlet on a circuit different from that to 

which the receiving antenna is connected.

If these measures do not eliminate the interference, please consult your dealer or an experienced 

radio/television technician for additional suggestions. Also, the Federal Communications 

Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference 

Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C. 

20402. Please specify stock number 004-000-00345-4 when ordering copies.

Notice: The changes or modifications not expressly approved by the party responsible for 

compliance could void the user's authority to  operate the equipment

.

This telephone system meets FCC standards for Hearing Aid Compatibility.

Licensed under US Patent 6,427,009.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled 

environment. This equipment should be installed and operated with a minimum distance of 20 

centimeters between the radiator and your body. This transmitter must not be co-located or 

operated in conjunction with any other antenna or transmitter.”
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines 

when used with the belt clip supplied with this product. Use of other accessories may not ensure 

compliance with FCC RF exposure guidelines.

4.  Insert the battery pack.
5.  Close the battery compartment by pushing the door up until it snaps into place.

1.  Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and 

place  your cordless telephone on a level surface, such as a desktop or tabletop, or 

you may mount it on the wall.

2.  Plug one end of the telephone line cord into 

the TEL LINE jack on the back of the base 

and the other end into a modular jack.

3.  Plug the AC power converter into the 

electrical outlet and the DC connector into 

the jack on the bottom of the base.

4.  Set the ringer switch (on the handset) to 

ON.

5.  Place the handset in the base cradle. The charge/in use indicator turns on, verifying 

the battery is charging. 

The unit will take 20 seconds to register and verify its 

security code.

)

Make sure your package includes the items shown here.

VOLUME (6) 

VOLUME (5) 

• Defects in materials or workmanship.

• One year, from date of purchase. 

(The warranty period for rental units begins with the first rental or 45 days from date of 

shipment to the rental firm, whichever comes first.)

• Provide you with a new or, at our option, a refurbished unit. The exchange unit is under 

warranty for the remainder of the original product’s warranty period.

• Properly pack your unit. Include any cables, etc., which were originally provided with the 

product. We recommend using the original carton and packing materials.

• ”Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the 

product is within the warranty period, must be presented to obtain warranty service.” For 

rental firms, proof of first rental is also required.  Also print your name and address and a 

description of the defect. Send via standard UPS or its equivalent to:

• Pay any charges billed to you by the Exchange Center for service not covered by the 

warranty.

• Insure your shipment for loss or damage. 

Thomson Inc

 accepts no liability in case of 

damage or loss.

• A new or refurbished unit will be shipped to you freight prepaid.

What your warranty does not cover:

• Customer instruction. (Your Owner’s Manual provides information regarding operating 

instructions and user controls. Any additional information, should be obtained from your 

dealer.)

• Installation and setup service adjustments.
• Batteries.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Products purchased or serviced outside the USA.
• Acts of nature, such as but not limited to lightning damage.

• Please complete and mail the Product Registration Card packed with your unit. It will make 

it easier to contact you should it ever be necessary. The return of the card is not required for 

warranty coverage.

• The warranty stated above is the only warranty applicable to this product. All other 

warranties, express or implied (including all implied warranties of merchantability or fitness 

for a particular purpose) are hereby disclaimed. No verbal or written information given by 

Thomson Inc

., its agents, or employees shall create a guaranty or in any way increase the 

scope of this warranty.

• Repair or replacement as provided under this warranty is the exclusive remedy of the 

consumer. 

Thomson Inc

. shall not be liable for incidental or consequential damages 

resulting from the use of this product or arising out of any breach of any express or implied 

warranty on this product. This disclaimer of warranties and limited warranty are governed 

by the laws of the state of Indiana. Except to the extent prohibited by applicable law, any 

implied warranty of merchantability or fitness for a particular purpose on this product is 

limited to the applicable warranty period set forth above.

• Some states do not allow the exclusion nor limitation of incidental or consequential 

damages, or limitations on how long an implied warranty lasts so the above limitations or 

exclusions may not apply to you.

• This warranty gives you specific legal rights, and you also may have other rights that vary 

from state to state.

• This warranty does not apply. Contact your dealer for warranty information.

To place order, have your Visa, MasterCard, or Discover Card ready and call toll-free 

1-800-338-0376. A shipping and handling fee will be charged upon ordering. We are 

required by law to collect appropriate sales tax for each individual state, country, and 

locality to which the merchandise is being sent. Items are subject to availability.

A long warbling tone (with ringer on) 

Signals an incoming call 

Three short beeps (several times) 

Page signal

One beep every 7 seconds 

Low battery warning

Handset can not link.

•  If any handsets become inoperable, place it on the main base cradle for 20 

seconds to re-register.

No dial tone

•  Check or repeat installation steps
•  Make sure the base power cord is connected to a working electrical outlet.
•  Make sure the telephone line cord is connected to the base unit and the modular 

phone jack?

•  Disconnect the base from the wall phone jack and connect another phone to the 

same jack. If there is no dial tone on the second phone, the problem might be 

your wiring or local service.

•  The handset might be out of range of the base. Move closer to the base.
•  Make sure the battery is properly charged (for 16 hours).
•  Ensure the battery pack is installed correctly.
•  Did the handset beep when you pressed the TALK/END button? Did the in use 

indicator come on? The battery may need to be charged.

Handset does not ring

•  Make sure the ringer is set to ON, this can be done through the handset setup 

menu Ringer Volume.

•  You may have too many extension phones on your line. Try unplugging  

some phones.