Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Thomson
  4. 2-8358AH
  5. Benutzerhandbuch

Thomson 2-8358AH Benutzerhandbuch

Download
Seite von 27
84
Web Configuration
Security
Security secures or scrambles messages traveling through the air between 
your wireless PCs and the gateway, so they can’t be observed by others. 
The following minimum security setting changes to factory defaults are 
recommended. 
Change the default Network name of SSID
•
Enable mac address filtering by using the Access control list features
•
Choose WPA/WPA2 encryption
•
See the 802.11b/g Security Web Page discussion below for details.
1. 802.11b/g Basic
To set the basic configuration for the wireless features, click
Basic from the 
Wireless menu. 
Note: 
These must match the settings you make on your wireless-equipped 
PC on the LAN side.
The SSID is your Network Name.
Change the default to a name of your choice up to 32 characters 
•
long.
The wireless radio in your Gateway can be completely de-activated 
•
by changing Interface to Disabled). 
Click the 
•
Apply button to save your settings.
The Gateway WiFi radio frequently transmits a beacon signal which can 
contain this network name (SSID).
The network Type is Open, so your SSID is included in that beacon, and is 
therefore detectable by any nearby wireless equipped PCs in the area. 
Administration
Status -  Telephony -  Router - 
Wireless
 
EMTA-Settings
Gateway
Wireless
Basic
Security
Access Control
802.11b/g Basic : This page allows configuration of the Access Point parameters, 
including the SSID and channel number.
Interface 
Enabled
Wireless MAC Address:  00:19:df:80:00:68
Network Name (SSID) 
ACG Welcome
New Channel 
5
Current Channel 
5
Data Encryption Mode:  wpa2
WPA passphrase: 
ACGProtection
Cancel
Apply