Rosslare Enterprises Ltd HLX24G Benutzerhandbuch
Installer Menu
44
HLX-24 Hardware Installation and Programming Manual
i.
Using Menu, choose the reporting options for each group
as desired. The options are Disable and Enable. The available
reporting groups are:
Alarms
Troubles
Alerts
Bypass
Arm/disarm
Restore
ii.
Press Enter to confirm.
iii.
Press ESC to exit the submenu.
Ack Timeout – Specify the time that the system has to send a
report event before the report alert is discontinued.
i.
report event before the report alert is discontinued.
i.
Using the alphanumeric keypad, set the value of the Ack
timeout to a value of 10 to 60.
ii.
Press Enter to confirm.
Signal Gain – Specify the strength of the DTMF.
i.
Using the alphanumeric keypad, set the value of the signal
gain to a value of between 300 and 1200.
ii.
Press Enter to confirm.
Call Wait Cancel – Specify whether call waiting interferes in the
event transmission to the central station by dialing *70 and
event transmission to the central station by dialing *70 and
entering the central station phone number. The default setting is
Disabled.
c.
CS Secondary – Specify the secondary Central Station (see CS
Primary above for detailed options and instructions).
d.
CS Protocol – Specify the reporting protocol used by the system to
report events to the central stations. Currently only Contact ID is
available.
available.
e.
Dialing Attempts – Specify the number of times the system
attempts to dial the primary stations number before attempting to
dial the secondary number. The default is 3 attempts.
i.
dial the secondary number. The default is 3 attempts.
i.
Using the numeric keypad, enter the dialing attempts value
between 1 and 15.
ii.
Press Enter to save.