Rosslare Enterprises Ltd PYR-2011AG Benutzerhandbuch
PYR-2011A
Installation Instructions
Advanced Wireless PIR
1
0706-0960110+02
1.
Introduction
The PYR-2011A Digital Wireless Passive Infrared (PIR) motion
detector is a high-performance, ultra low power intrusion sensor
with advanced design ideal for residential and commercial
applications.
The PYR-2011A's SSFL technology (look down) allows detection at
The PYR-2011A's SSFL technology (look down) allows detection at
proximity of 50cm from its mounting location.
This unit works with Rosslare’s control panels like HomeLogiX™,
This unit works with Rosslare’s control panels like HomeLogiX™,
which is wireless, and AuraSys™, which is wired.
For the PYR-2011A to work with AuraSys™, the AuraSys™ panel
For the PYR-2011A to work with AuraSys™, the AuraSys™ panel
must have the XR-16 wireless expansion.
The PIR senses slight motion within a coverage area by detecting
The PIR senses slight motion within a coverage area by detecting
infrared energy with a Pyroelectric sensor.
Serving as an anti-intrusion sensor, the PIR can monitor open space
Serving as an anti-intrusion sensor, the PIR can monitor open space
within line of sight.
“Walk & Radio” test is easy, as well as friendly and makes it very
“Walk & Radio” test is easy, as well as friendly and makes it very
comfortable for placing and setting. The PYR-2011A uses fuzzy logic
to improve detections and reduce false alarms. It also provides
digital temperature compensation and self-test capability.
The PYR-2011A is supplied with front and back tampers for high
The PYR-2011A is supplied with front and back tampers for high
security.
As a wireless device, it includes a supervised mechanism as well as
a battery-checker and tamper announcement.
CAUTION: Changes or modifications to this equipment not
CAUTION: Changes or modifications to this equipment not
expressly approved by the party responsible for compliance
(Rosslare Ltd.) could void the user’s authority to operate the
equipment.
2.
Technical Specifications
2.1
Optical Characteristics
Lens Type: Spherical
Field of view: 115°
Max. Coverage: 14 x 14 m (46 x 46ft)
No vertical adjustment
Field of view: 115°
Max. Coverage: 14 x 14 m (46 x 46ft)
No vertical adjustment
2.2
Electrical Characteristics
Battery type: CR123 (3V/1300mhA)
Current Consumptions: Standby 15µa, 10ma transmission.
Battery Life (nominal): 3 years (150tr/day)
Current Consumptions: Standby 15µa, 10ma transmission.
Battery Life (nominal): 3 years (150tr/day)
Detector Type: Dual PYRO IR element (IR filter 5um÷14um)
Alarm Signaling: Red LED 2 seconds on (push button setting)
Events Transmission: Alarm, Tamper, Low battery.
Sensitivity: 3 levels fuzzy logic (jumper setting)
Speed Detect: 0.2m/s ÷ 3m/s ∆ t= 1.1°C
Alarm Signaling: Red LED 2 seconds on (push button setting)
Events Transmission: Alarm, Tamper, Low battery.
Sensitivity: 3 levels fuzzy logic (jumper setting)
Speed Detect: 0.2m/s ÷ 3m/s ∆ t= 1.1°C
(0.66 ft/s ÷ 9.84 ft /s ∆ t= 34° F)
Temperature Compensation: Digital dual slope (+/- 1°C)
Tamper Switches: Back and front Cover tampers
Supervisory Signals: Electronic malfunction, temperature out of range
Tamper Switches: Back and front Cover tampers
Supervisory Signals: Electronic malfunction, temperature out of range
(by flashing LED)
Arming types:
Normal- 2 minutes sleep, followed by last alarm
Dynamic- 2 minutes sleep, followed by last movement
(retrigger
(retrigger
)
Test modes- walk test (no sleep) 1 min
Radio test- 10 transmissions
2.3
RF Transmission Characteristics
Frequency: model H = 868.35 MHz; model G = 433.92 MHz
Range: 200 meters (590.55ft) open field conditions
Supervision transmission: automatic, at 20-minute intervals
Self check: 3 hours from last alarm (retriggered)
Supervision transmission: automatic, at 20-minute intervals
Self check: 3 hours from last alarm (retriggered)
2.4
Environmental Characteristics
Operating Environment: Indoor use
Operating Temperature: -10 to 60°C (14 to 140°F)
Operating Humidity: 0 to 95% (non-condensing)
RFI Protection: >20 V/m up to 1000 MHz
Operating Temperature: -10 to 60°C (14 to 140°F)
Operating Humidity: 0 to 95% (non-condensing)
RFI Protection: >20 V/m up to 1000 MHz
2.5
Physical Characteristics
Dimensions: 127x80x63 mm 5x3.15x2.48 inch (Fits US Gang Box)
Weight: 0.27 lbs (123g) (without battery)
Compliance with standard: CE
Weight: 0.27 lbs (123g) (without battery)
Compliance with standard: CE
3.
PYR-2011A Features
•
Advanced micro-controller electronics: 10-bit A-to-D and
advanced algorithms for superior movement speed spectrum
analysis
•
Shielded dual-element Pyro: Inside a dust-proof chamber
designed to reduce thermal changes and insect protection
•
Three levels of sensitivity: High, medium or low; by jumper
selection
•
Power saving: Two transmission modes by jumper
•
Back and Front Cover tamper switches: Protection against
cover or wall removal for higher security.
•
Easy & comfortable installation: Easy installation without PCB
adjustment.
•
Easy Walk & Radio test: By single contactless switch.
•
Energy detection system: By using fuzzy logic algorithms,
detection is improved and false alarms are reduced
•
Environment temperature compensation: Maintains constant
detection capability
•
Adaptive filter: Compensates for changes in a detected
object’s speed
•
Continuous monitoring: Sends visual alerts in case of malfunction
(digital and analog) and temperature out of range