Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Namsung Corporation.
  4. RF30
  5. Benutzerhandbuch

Namsung Corporation. RF30 Benutzerhandbuch

Download
Seite von 5
                   
RF30
 
© 2010 All rights reserved Printed in China 
http://www.namsung.com 
Installation 
 
 
Installing the RF30 Receiver 
 
1.  Connect the 3.5mm cable to the REMOTE IN input on the back of the radio. ex) 
WM3000RF 
2.  Connect the black wire from the RF30 receiver to a good ground (-) source. 
Typically, the ground wire connection from the radio wiring harness can be used. 
3.  Connect the red wire from the RF30 receiver to a 12 volt accessory switched 
power source. This may be connected to the red accessory power wire at the 
radio wiring harness. 
  See illustration below for connection details. 
 
 
 
 
Inserting the battery in the RF30 remote 
 
Insert the battery (CR2025) into the RF30 remote control with the (-) negative battery 
terminal facing in toward the RF remote, and the (+) positive battery terminal facing 
outward toward the battery cover. See illustration below.