Psion Inc 7527BHC Benutzerhandbuch

Seite von 286
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual
177
Chapter 5: Configuration
Decoded (Intermec ISCP)
Reading Range
Determines the reading distance from which a bar code can be successfully scanned. 
The default setting, Extended, allows for increased reading distance. 
Start/Stop Transmit
Setting this parameter to on enables the transmission of start and stop characters, 
which are usually not transmitted. Code 39 can start and end with either a or a 
character (see also next parameter Accepted Start Char).
Accepted Start Char
This parameter allows the user the option of using one of the two start/stop 
characters or both ($ char, * char, $ and * char). 
Check Digit Verification
Uses the specified algorithm of the option you've chosen to ensure the integrity of 
the symbol data before transmitting. If the data does not contain that algorithm, the 
data is not transmitted. The available options are: Disabled, MOD 43 Check, French 
CIP, or Italian CIP. 
Notes: French CIP (French pharmaceutical) is only used with bar codes contain-
ing 7 characters.
Italian CIP (Italian pharmaceutical) is also known as Code 32. It is trans-
mitted as a standard Code 39 if checksum is not validated.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code 
refers to the number of characters (i.e., human readable characters), including check 
digit(s). 
Field Size/Char
Refer to page 143 for details.