ViewSonic Corporation M3AWEB56GA Benutzerhandbuch
16 ViewSonic airsync Display V210
Resetting the airsync V210
Soft Reset
Should your airsync Display V210 lock up or fail to respond to the stylus, it
may be restarted without turning off the power.
may be restarted without turning off the power.
1 Locate the reset button on the top of your airsync.
2 Use the tip of your stylus to press the reset button to restart your airsync.
2 Use the tip of your stylus to press the reset button to restart your airsync.
Figure 8: The Soft Reset Button
Hard Reset
A hard reset may be required on rare occasions where your airsync Display
V210 completely locks up and the soft reset described above does not help.
V210 completely locks up and the soft reset described above does not help.
You can perform a power interrupt type hard reset by detaching the both the
battery and the AC power adapter while the device is On.
battery and the AC power adapter while the device is On.
NOTE: Soft or Hard resetting will cause you to loose all customization in
DRAM (such as files, programs, and settings).
DRAM (such as files, programs, and settings).
As a precaution, we recommend that you drag any changed files that you want
to protect to the V210’s Permanent Storage folder before removing the battery.
to protect to the V210’s Permanent Storage folder before removing the battery.
Firmware Image Upgrade
From time to time ViewSonic may offer a firmware image upgrade for
airsync hardware users. For current information visit our web site at or check
with your IT Administrator.
airsync hardware users. For current information visit our web site at or check
with your IT Administrator.