ViewSonic Corporation VS10407 Benutzerhandbuch
ViewSonic
3-in-1 Access Point
22
4.2. System
•
AP Password: Changing the password for the AP is as easy as typing
the password into the Enter New Password field. Then, type it again
into the Re-enter to confirm.
the password into the Enter New Password field. Then, type it again
into the Re-enter to confirm.
•
Click the Apply button to save the setting.
•
Use the default password when you first open the configuration pages,
after you have configured these settings, you should set a new password
for the AP (using the Password screen). This will increase security,
protecting the AP from unauthorized changes.
after you have configured these settings, you should set a new password
for the AP (using the Password screen). This will increase security,
protecting the AP from unauthorized changes.
•
Restore Factory Defaults: Click the Yes button to reset all configuration
settings to factory default values. Note: Any settings you have saved will
be lost when the default settings are restored. Click the No button to
disable the Restore Factory Defaults feature. Click the Apply button to
save the setting.
settings to factory default values. Note: Any settings you have saved will
be lost when the default settings are restored. Click the No button to
disable the Restore Factory Defaults feature. Click the Apply button to
save the setting.
•
Backup/Restore Setting: Click Backup to store the Access Point's
configuration on your local PC. Click Restore to restore Access Point's
configuration from your local PC. Check all the settings and click Apply
to save them.
configuration on your local PC. Click Restore to restore Access Point's
configuration from your local PC. Check all the settings and click Apply
to save them.