ViewSonic Corporation VS10407 Benutzerhandbuch
ViewSonic
3-in-1 Access Point
46
Troubleshooting
My Wireless AP will not turn on. No LED's light up.
Cause:
•
The power is not connected.
Resolution:
•
Connect the power adapter to your AP and plug it into the power outlet.
Note: Only use the power adapter provided with your AP. Using any
other adapter may damage your AP.
other adapter may damage your AP.
LAN Connection Problems I can't access my AP.
Cause:
•
The unit is not powered on.
•
There is not a network connection.
•
The computer you are using does not have a compatible IP Address.
Resolution:
•
Make sure your AP is powered on.
•
Make sure that your computer has a compatible IP Address. Be sure that
the IP Address used on your computer is set to the same subnet as the
AP. For example, if the AP is set to 192.168.1.2, change the IP address
of your computer to 192.168.1.15 or another unique IP Address that
corresponds to the 192.168.1.X subnet.
the IP Address used on your computer is set to the same subnet as the
AP. For example, if the AP is set to 192.168.1.2, change the IP address
of your computer to 192.168.1.15 or another unique IP Address that
corresponds to the 192.168.1.X subnet.
•
Use the Reset button located on the rear of the AP to revert to the default
settings.
settings.
I can't connect to other computers on my LAN.
Cause:
•
The IP Addresses of the computers are not set correctly.
•
Network cables are not connected properly.
•
Windows network settings are not set correctly.