ViewSonic Corporation WL850FJB Benutzerhandbuch

 

 

           

 

                                                                                                                                                             

User’s Guide  

18

This field is used to display the current status of connection. When the state shows  “Connected to 

Network“ means normal flow of operation in Infrastructure mode. The PC is connected to access 

point.  Networking is available.  

A state of “Scanning” means that the node is searching for available access point and detecting  

the SSID for an available access point within range. 

 
This field will also display an error message for some reason if the driver fails to initialize. 

 
 

Infrastructure Mode   - The driver will scan all available channels continuously until it finds one or 

more Access Points that match its SSID.  At that point it will try and authenticate and 

associate with the Access Point. 

     Peer to Peer Mode   - The driver will scan for 5 seconds looking for an existing Ad Hoc network      

using the same SSID.   

-  Current Channel and Transmit Rate 

   

 

Shows the channel of the radio and transmit rate being currently used for an active connection.    

    This value has no meaning when the radio is “Scanning” 

 

-  Link Quality 

The Link Quality bar graph is only active when the node is in Infrastructure Mode.  The bar graph 
displays the quality of the link between the node and Access Point.   

 

 

- 

 

     The Signal Strength bar graph is only active when the node is in Infrastructure Mode. The bar      
     graph displays normalized signal strength as reported by the radio, averaged over all frames over  
    100 bytes long that are received from the Access Point.