ViewSonic Corporation N210 Benutzerhandbuch
ViewSonic N210 5
Start Your Installation
Connecting the NexTVision N210
Follow these instructions to connect the NexTVision N210 to its peripheral devices:
1. Plug one end of the power cord to an AC outlet and the other end into the power adapter. Then
1. Plug one end of the power cord to an AC outlet and the other end into the power adapter. Then
connect the power adapter to the N210.
2. Connect the monitor to the video connector port?
3. Connect the USB keyboard and USB mouse to the USB type A ports.
4. Connect the ViewSonic patch antenna to the antenna out and screw in the bolt or connect the
3. Connect the USB keyboard and USB mouse to the USB type A ports.
4. Connect the ViewSonic patch antenna to the antenna out and screw in the bolt or connect the
10/100-TX network cable to the RJ-45 network connector.
6. Connect the printer or other compatible devices to the USB type A port if necessary.
(see figure below.)
Connector Descriptions
Power Connector
Connects the power adapter with the power cord to the device
RJ-45 Network Connector
Connects the built-in 32-bit 10/100-TX Ethernet network LAN Controller to a host or Hub
LED Lan Link and activity Indicators
Green:Green-on indicates a successfully connected network link.
Amber: Amber-on indicates that network packets are being sent or received through the RJ-45
port
Amber: Amber-on indicates that network packets are being sent or received through the RJ-45
port
Audio out
Connects line output for Audio
Headphone out
Connects an external speaker or headphone
Microphone In
When the host server supports a record software program and the related protocol as well, the
connects a microphone (when host server supports a program for audio recording and related
protocols)
connects a microphone (when host server supports a program for audio recording and related
protocols)
USB Ports (type A)
Microphone-in
Audio-out
Headphone-out
Network
VGA
DVI
USB ports (type A)
USB ports (type B)
DC
ViewSonic patch antenna-out