INNCOM International Inc. 025010 Benutzerhandbuch
INNCOM PC-502.2 Datasheet
P a g e
| 2
Ranges are determined by performing an RF link quality test using e528.3G thermostats as the
transmitter and the PC-502.2 as the receiver. The maximum distance threshold is based on a 95%
overall link quality. Outdoor ranges were conducted in a low noise, free air environment. Indoor
ranges are for reference. Indoor ranges are affected by the ambient environmental noise floor and
building construction materials.
transmitter and the PC-502.2 as the receiver. The maximum distance threshold is based on a 95%
overall link quality. Outdoor ranges were conducted in a low noise, free air environment. Indoor
ranges are for reference. Indoor ranges are affected by the ambient environmental noise floor and
building construction materials.
Network
ȱTopologyȱ
Figure 2 PC-502 Layer-2 Topology
In this application, the PC-502.2 in participation with the e529.RF provides the Layer-1 to Layer-2
RF Bridge where both wireless in-room and wireless back-end networking are required. The PC-
502.2 can also patch areas within the Layer-2 network where signal strength is lost due to distance
limitations or interference.
RF Bridge where both wireless in-room and wireless back-end networking are required. The PC-
502.2 can also patch areas within the Layer-2 network where signal strength is lost due to distance
limitations or interference.