INNCOM International Inc. 201104TXR Benutzerhandbuch
6
Copyright 2014 INNCOM by Honeywell
PoE Powered B578
The B578 is an IEEE 802.3af compliant Powered Device (PD) interface with a current mode switching regulator,
providing a complete power solution for PD applications. The B578 is an IEEE class 2 device. PoE devices are
classified below:
providing a complete power solution for PD applications. The B578 is an IEEE class 2 device. PoE devices are
classified below:
IEEE Class
Minimum Power Output at the PSE Maximum power Input at the Powered Device
0
15.4W
0.44 to 12.95W
1
4.0W
0.44 to 3.84W
2
7.0W
3.84 to 6.49W
3
15.4W
6.49 to 12.95W
Powering another INNCOM device on the +12VDC rail directly from H2 or H3 when powering the B578 from PoE
is not recommended. If the B578 exceeds its IEEE 802.3af class-2 power rating (i.e., draws more than 7W), the
PSE switch in the network will shut down the power and Ethernet connectivity to the B578.
is not recommended. If the B578 exceeds its IEEE 802.3af class-2 power rating (i.e., draws more than 7W), the
PSE switch in the network will shut down the power and Ethernet connectivity to the B578.
For B578 to support PoE power, order the PoE module (02-9949). Connect the module to M1 on the B578 logic
board, then connect the PoE-powered Ethernet patch cable to J3 (RJ45) and power up the unit.
board, then connect the PoE-powered Ethernet patch cable to J3 (RJ45) and power up the unit.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IC Statement
This Class B Digital Apparatus complies with Candian ICES-003
Cet apparel numerique de la classes B est conforme a la norme NMB-o003 du Canada.
Cet apparel numerique de la classes B est conforme a la norme NMB-o003 du Canada.
Ordering Information
The B57x is available in several operating ranges all based on the same fundamental hardware platform. The
ordering part numbers (OPN) are formed by a combination of the elements, as shown below.
ordering part numbers (OPN) are formed by a combination of the elements, as shown below.
Model =
Power Supply =
Configuration =
=
201-104- POE - B578N B0
-
Housing Configuration
Example: 201-104-POE-B578S-B0: B578 with PoE power supply, configured as a Deep Mesh RF Edge Router
in a surface mount housing configuration.
in a surface mount housing configuration.
Example: 201-104-P12-B578N-A0: B578 with a +12VDC power supply configured as a Deep Mesh RF Edge
Router and Tridium Niagara Interface, in a DIN rail housing configuration.
Router and Tridium Niagara Interface, in a DIN rail housing configuration.
Example: 201-104-P12-PC-803S-A0: PC-803 with a +12VDC power supply configured as a PC-803 room