Climax Technology Co Ltd CO8 Benutzerhandbuch
Carbon Monoxide Detector
(CO-8, CO-8F1)
(CO-8, CO-8F1)
Parts Identification
1. Dual Color LED (Amber & Red)
When the battery voltage is low, the Amber LED will flash every
30 sec.
30 sec.
While the Carbon Monoxide Detector is transmitting signal, the
RED LED will flash
RED LED will flash
While Carbon Monoxide is alarming, the Red LED will flash
quickly.
quickly.
2. Learn/Test Button
Press the button to:
Transmit a learn/test signal for device learning or radio range
test.
test.
To silence alarm temporarily after alarm activation.
3. Battery Compartment Cover
4. Mounting Holes
5. Mounting Bracket
Battery
3 “AA” 1.5V alkaline batteries are used to supply power.
The Carbon Monoxide Detector has a battery life of approximately 1.8 years.
When Carbon Monoxide Detector detects low battery voltage, a low battery signal will be
transmitted along with regular signal transmissions. The Amber LED will flash and the Carbon
Monoxide Detector will emit a beep every 30 seconds.
transmitted along with regular signal transmissions. The Amber LED will flash and the Carbon
Monoxide Detector will emit a beep every 30 seconds.
When battery is exhausted, remove the battery compartment cover and replace with new
batteries.
batteries.
Supervision
After installation, the Carbon Monoxide Detector will automatically transmit Supervisory Signals
periodically to the Control Panel at intervals of 30 min. to 50 min. randomly.
periodically to the Control Panel at intervals of 30 min. to 50 min. randomly.
If the Control Panel has not received the signal from the Carbon Monoxide Detector for a preset
period of time, the Control Panel will determine the Carbon Monoxide Detector has failed
supervision and is out-of-order.
period of time, the Control Panel will determine the Carbon Monoxide Detector has failed
supervision and is out-of-order.
Carbon Monoxide Detection
The alarm will be activated after CO concentration is detected according to time length in
following table:
following table:
CO concentration
level
Time taken before
alarming
30 ppm
N/A
50 ppm
60~90 minutes
100 ppm
10~40 minutes
300 ppm
Under 3 minutes