Climax Technology Co Ltd G4MR Benutzerhandbuch
1
INSTALLATION GUIDE
z SYSTEM INTRODUCTION
The Locator system includes the following components:
Locator (LT-49):
The Locator receives 433 MHZ signal sent from WTR and transmits
the signal in 912 MHZ to Repeater (RPN-99) or Base Unit
(BUN-152).
Repeater (RPN-99): (Optional) The Repeater is an optional device used to relay signal
sent from Locator with same Group number and System ID in 912
MHZ.
Base Unit (BUN-152): The Base Unit receives the signals sent from Locator or Repeater in
912 MHZ and forward the signal to PSTN Dialer via RS232
connection
z SYSTEM OPERATION DIAGRAM
z SYSTEM CAPABILITY:
z Each system can have maximum of 4096 LT-49 and 4096 RPN-99.
z Each Locator and Repeater has its own ID Code set by a 12-pin Dip Switch.
z The frequency hopping technology is adopted in the communication between
z Each Locator and Repeater has its own ID Code set by a 12-pin Dip Switch.
z The frequency hopping technology is adopted in the communication between
Locator, Repeater and BUN-152.
z There are three groups of hopping frequency bands are available. Each group
contains 25 channels:
GROUP 1: 906.26 ~ 914.90 MHZ, 25 channels
GROUP 2: 906.38 ~ 915.02 MHZ, 25 channels
GROUP 3: 906.50 ~ 915.14 MHZ, 25 channels
z Make sure the distance between BUN-152, RPN-99 and LT-49 is greater than 5
meters. If the distance is too close, the signal may interfere with each other.
DEC-31.-2013