Climax Technology Co Ltd RPN Benutzerhandbuch
1
INSTALLATION GUIDE
z SYSTEM CONFIGURATION
Locator (LT-49):
It is used for receiving 433 MZH device signal and transmit it in 912
MHZ to Repeater (RPN-99) or Base Unit (BUN-152).
Repeater (RPN-99): It is used to relay whatever signal received with same Group number
and System ID in 912 MHZ.
Base Unit (BUN-152): To receive the signals from LT-49 and RPN-99 in 912 MHZ.
z SYSTEM CAPIBILITY:
z Each system can have maximum of 4096 LT-49 and 4096 RPN-99.
z Each Locator and Repeater has its own ID Code set by a 12-pin Dip Switch.
z The frequency hopping technology is adopted in the communication between
z Each Locator and Repeater has its own ID Code set by a 12-pin Dip Switch.
z The frequency hopping technology is adopted in the communication between
Locator, Repeater and BUN-152.
z There are three groups of hopping frequency bands are available. Each group
contains 25 channels:
GROUP 1: 906.26 ~ 914.90 MHZ, 25 channels
GROUP 2: 906.38 ~ 915.02 MHZ, 25 channels
GROUP 3: 906.50 ~ 915.14 MHZ, 25 channels
26-APR.-2005