Hung Tat Electronic Co Ltd BTKB14TA059 Benutzerhandbuch
Turning the Keyboard ON/OFF
Pairing the Keyboard to a Bluetooth enabled tablet
1. Make sure the Bluetooth Keyboard is turned ON.
2. Press and HOLD the [Pair] button for 6 full seconds and the
[Bluetooth] light will flash continuously - the Keyboard is
now in pairing mode.
3. Keep the Keyboard and tablet (or other Bluetooth device) within
2 feet of each other during the pairing process.
4. Set your tablet (or other Bluetooth device) to search for
Bluetooth devices.
5. When the Bluetooth device finds the Keyboard, select
“Bluetooth Keyboard” from the list.
6. Using the Keyboard, type the
password shown on the tablet
(or device) and
press enter.
7. After pairing successfully with the tablet,
“Bluetooth Keyboard
Connected”
is displayed. To disconnect, turn the Keyboard OFF.
Charging the keyboard
Step 1:
1. Connect the small end of the included Micro USB Cable to the
USB charging port on the side of the Keyboard.
2. Connect the large end of the included Micro USB cable to an
available USB port on your computer (or other devices made for
USB charging.
Pair button
Blinking
1.
To turn ON, Slide the switch to the ON position. The Bluetooth
light will blink once, then the Caps Lock light will blink once.
2. To turn OFF, Slide the switch to the OFF position. The Bluetooth
2. To turn OFF, Slide the switch to the OFF position. The Bluetooth
light will blink 3 times and the Keyboard will turn OFF.
Power Indicator Light
NOTE:
When turned ON, the Keyboard will automatically
connect to the last tablet (or other Bluetooth device) that it
was paired with. To switch to another device, turn OFF the tablet
or device and restart the pairing process with the new device.
FCC Part 15:
The Bluetooth word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
iPad is a trademark of Apple Inc., registered in the U.S. and other countries.
All trademarks and trade names are those of their respective owners.
Pair Button
Micro
3. The LED Charge Indicator Light on the Keyboard will light up
5ED when charging.
4. The LED Charge Indicator Light on the Keyboard will turn OFF
when finished charging.
Charge your Keyboard with a PC, MAC or USB adapter.
Charge your Bluetooth Keyboard fully before use.
A message will pop up when pairing is successful.
If pairing fails, repeat the steps above.
In the box
Using the wireless bluetooth keyboard
iPad connecting settings
Android connecting settings
Legal information
Limited warranty
On your iPad®, tap the
Step 4:
Toggle Bluetooth to
On
.
Step 5:
The keyboard will show up under
Devices
on the iPad. Select
Bluetooth Keyboard
.
Step 6:
A code will appear on the screen. Enter this code on the keyboard
and click
Enter
.
Step 2:
Click
General
.
Step 3:
Click
Bluetooth
.
icon from the Home Screen.
In the unlikely event that this product is defective, or does not perform properly, you may within One (1)
Year from your original date of purchase return it to the authorized service center for repair or exchange.
Year from your original date of purchase return it to the authorized service center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
t Provide proof of the date of purchase within the package (Dated bill of sale).
t Prepay all shipping costs to the authorized service center, and remember to insure
your return.
t Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective
t Provide proof of the date of purchase within the package (Dated bill of sale).
t Prepay all shipping costs to the authorized service center, and remember to insure
your return.
t Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective
unit within
the package.
t Describe the defect or reason you are returning the product.
t Describe the defect or reason you are returning the product.
User Manual
User Manual
User
Manual
ON
OFF
ON
OFF
Micro
In the box
User Manual
User Manual
User
Manual
O
O
Touch
General
Touch
Bluetooth
Toggle Bluetooth
to On
NOTE: 5egarding battery life:
Continues use: up to 40 hours,Stand by: 300 hours.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user's authority to operate
the equipment.
the party responsible for compliance could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada License-exempt RSS-210. Operation
is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
BTK-059