DTC Communications Inc. T2500 Benutzerhandbuch

Introduction 

DTC has built a great deal of flexibility into the programming options you 
have on the T-2500-M.  DTC factory programs your frequencies at time of 
order at no additional charge to you. 
Software and programming cable are included with the kit, enabling you 
to change your frequencies and other associated features.  This is ideal if 
you work with other agencies, or anticipate the equipment being used by a 
multi-jurisdictional task force. You can program up to ten channel  
settings per unit. In general, this allows you to program most variations 
you might encounter in the field at the depot level.
The configuration of each channel is managed with DTC’s Universal 
Programming Software. This software is included with your transmitter 
and allows you to do all of the following:

• Assign frequencies to each channel 
• Enable/disable recording for each channel  
• Select the mode of operation for each channel (digital clear, digital encrypted, analog 
   narrow, or analog wideband, analog scrambled) 
• Set internal clock 
• Select the DES-OFB and AES encryption keys and 16-bit key ID 

Universal Programming Software CD

TIP: Make sure that you program 

your devices to match frequencies 

and test the components as a 

system prior to going into the field!