MOTREX CO. LTD. MTXA300JA Benutzerhandbuch
AUX Input
12
It is possible to connect your portable media player to the car audio system for
playback of the audio tracks via the car speakers.
playback of the audio tracks via the car speakers.
To get the best results when connecting the portable media to the car audio system,
follow these steps:
- Use a 3.5mm stereo plug cable to connect the media player headphone
socket at each end as follows.
- Adjust the portable media player to approximately 3\4 volume and start playback.
- Press the MEDIA button on the car audio unit to change into AUX mode.
- The volume and tone can now be adjusted on the Audio Unit to the desired level.
follow these steps:
- Use a 3.5mm stereo plug cable to connect the media player headphone
socket at each end as follows.
- Adjust the portable media player to approximately 3\4 volume and start playback.
- Press the MEDIA button on the car audio unit to change into AUX mode.
- The volume and tone can now be adjusted on the Audio Unit to the desired level.
Note:
- The audio quality of your media player and the audio tracks on it may not be of the
same sound quality as the car audio system is CD Player.
- If the sound of the media player is too low compared with the radio or CD, increase
the volume of the player.
- If the sound of the media player is too loud and/or distorted, decrease the volume
of the player.
- When in AUX mode, only the Volume, Bass, Middle, Treble, Mode functions of the
car audio unit can be used.
- For technical information regarding the AUX input, refer to the specification section
at the end of this operation manual.
- The audio quality of your media player and the audio tracks on it may not be of the
same sound quality as the car audio system is CD Player.
- If the sound of the media player is too low compared with the radio or CD, increase
the volume of the player.
- If the sound of the media player is too loud and/or distorted, decrease the volume
of the player.
- When in AUX mode, only the Volume, Bass, Middle, Treble, Mode functions of the
car audio unit can be used.
- For technical information regarding the AUX input, refer to the specification section
at the end of this operation manual.
5
11
Bluetooth Operation
1. Please confirm your Phone supports Bluetooth features before trying to use
the Bluetooth function of this unit.
* Some Bluetooth enabled deviceds may not function properly with the unit.
* Motrex can not guarantee the compatibility of all mobile device together with unit.
the Bluetooth function of this unit.
* Some Bluetooth enabled deviceds may not function properly with the unit.
* Motrex can not guarantee the compatibility of all mobile device together with unit.
2. Trouble Shooting Guide
Interference Frequency in the air sometimes interrupt your phone and block the
radio to function properly.
Any troubles not work BLUETOOTH function on the radio with your phone,
hereby recommended to following Trouble Shooting in sequence.
1. Key “ACC OFF” in your car.
2. Get to “Bluetooth Menu”on the Phone, so as to remove any pre-registered
device list-up.
3. Take the battery in the Phone out for a while and get into again for “Power On”.
4. Key “ACC ON” in your car and proceed “PAIRING” with the radio once again.
Interference Frequency in the air sometimes interrupt your phone and block the
radio to function properly.
Any troubles not work BLUETOOTH function on the radio with your phone,
hereby recommended to following Trouble Shooting in sequence.
1. Key “ACC OFF” in your car.
2. Get to “Bluetooth Menu”on the Phone, so as to remove any pre-registered
device list-up.
3. Take the battery in the Phone out for a while and get into again for “Power On”.
4. Key “ACC ON” in your car and proceed “PAIRING” with the radio once again.
1. Using a Bluetooth wireless connection
1) Your Audio Unit supports Bluetooth wireless technology. You can set up a
wireless link with Bluetooth cellular phone.
2) Keep PAIRING the cellular phone with Audio Unit in a few minutes as the
phone are being switched on well enough.
Note:
- Since this Audio Unit is on standby to connect with your cellular phone via
Bluetooth wireless technology, using this Audio Unit without running the engine
can result battery drainage.
- This Audio Units phone call reception is on standby when ignition switch is set to
ACC OFF or ON.
- The line-of-sight distance between this Audio Unit and your cellular phone must
be10 meters or less for sending and receiving voice and data via Bluetooth wireless
technology. However the transmission distance may become shorter than the
estimated distance depending on the environment in use.
- Digital Noise & Echo suppression system provides the best sound clarity with little
or no distortion (Echo & side tone will happen depending on Cellular Phone or
service network).
- To ensure the quality of calling, you should select a proper Bluetooth VR Level.
This Audio Unit have already set with the best Bluetooth VR Level.
1) Your Audio Unit supports Bluetooth wireless technology. You can set up a
wireless link with Bluetooth cellular phone.
2) Keep PAIRING the cellular phone with Audio Unit in a few minutes as the
phone are being switched on well enough.
Note:
- Since this Audio Unit is on standby to connect with your cellular phone via
Bluetooth wireless technology, using this Audio Unit without running the engine
can result battery drainage.
- This Audio Units phone call reception is on standby when ignition switch is set to
ACC OFF or ON.
- The line-of-sight distance between this Audio Unit and your cellular phone must
be10 meters or less for sending and receiving voice and data via Bluetooth wireless
technology. However the transmission distance may become shorter than the
estimated distance depending on the environment in use.
- Digital Noise & Echo suppression system provides the best sound clarity with little
or no distortion (Echo & side tone will happen depending on Cellular Phone or
service network).
- To ensure the quality of calling, you should select a proper Bluetooth VR Level.
This Audio Unit have already set with the best Bluetooth VR Level.
2. Pairing Your Audio Unit and Bluetooth Phone
This Audio Unit supports Hand Free profile, Headset profile, A2DP (Audio Advanced
Distribution profile) and AVRCP (Audio Video Remote Control profile).
This Audio Unit supports Hand Free profile, Headset profile, A2DP (Audio Advanced
Distribution profile) and AVRCP (Audio Video Remote Control profile).
Bluetooth Special Notes