NEC Corporation FC-N22A Benutzerhandbuch
59
U
se
s
s
o
f N
2
2
A
2.7.3 Connecting External Monitor
To get a wide display screen of a higher resolution, an external monitor can be connected to
N22A through an external analog RGB monitor connector. Follow the procedure below.
1
Confirm that the power of N22A is OFF.
2
Connect a proper monitor cable to the connector on the external monitor.
3
Turn on the monitor.
4
Turn on the N22A.
If nothing appears on the monitor, press Fn + F3 to select the monitor or both of the monitor
and LCD display (simultaneous display).
If nothing appears on the monitor, press Fn + F3 to select the monitor or both of the monitor
and LCD display (simultaneous display).
Some OSs may limit display modes.
Do not remove the external monitor from N22A in the suspend (standby) mode.
If no external monitor is connected at restart of operations in N22A, the LCD display
Do not remove the external monitor from N22A in the suspend (standby) mode.
If no external monitor is connected at restart of operations in N22A, the LCD display
remains blank without output.
Some OSs or settings may limit the monitor change by hot keys Fn + F3.