DONGGUAN ALLLIKE ELECTRONIC CO. LTD B103 Benutzerhandbuch

SBT602 User Manual

1. Connect the small end of the USB charging cord into 

    the Mini USB charging port on the back of the 

    speaker.

2. Connect the other end of the USB cable to your 

    computer’s USB port.

3. The indicator light on the front of the speaker lights 

    up RED when charging.

4. The indicator light on the front of the speaker turns 

     off when finished charging.

1.  Make sure your Bluetooth device supports A2DP profile.
2.  Turn up the volume on your Bluetooth device.
3.  You may have to unpair the speaker, then re-pair to your 
     device.

1. Make sure the Bluetooth Speaker is turned ON before 
    beginning the pairing process.
2. Keep your Bluetooth Speaker and Bluetooth enabled 
    device within 3 feet of each other during the pairing 
    process.
3.  Press and hold the [       ] button. The LED indicator   
     light on the front of the speaker will flash RED and 
     BLUE alternately.
4. Check that YOUR device’s Bluetooth feature is turned ON.
5. Try repeating the pairing process, see “Pairing the Speaker
     with a Bluetooth enabled device”.

            My Bluetooth Device is not able to pair with the 
              Bluetooth Speaker.

           I can pair the Bluetooth Speaker with my Bluetooth 
            device, but I cannot hear any music?

1.

Make sure the Bluetooth Speaker is turned ON before 

     beginning the pairing process.
2.

Press and hold the [       ] button. The LED indicator   

     light on the front of the speaker will flash RED and 
     BLUE alternately.
3.

The speaker is now in pairing mode

          I cannot get the Bluetooth Speaker into Pairing Mode.

interaction with the Bluetooth Speaker may 

The speaker will read out the phone number of 

any incoming calls while connected to a 

Bluetooth enabled device.

Powering ON/OFF
• To turn ON, press and hold the [        ] button for 4   
  seconds.    
• To turn OFF, press and hold the [        ] button for 3 
   seconds.  

Adjusting the volume
Press and hold the [       VOL+] button to increase the 
volume and the [      VOL-] button to decrease it to 
your desired level.

Most media enabled smart phones will display 

Play / Pause
Press the [ PLAY/PAUSE ] button to pause the music.  
To resume music playback, press the [ PLAY/PAUSE ] 
button again.

(With devices that have AVRCP Bluetooth profile)
Quickpress the [       VOL+] button to go to the next song
Quickpress the [       VOL-] button to go to the previous song.

1. [        VOL-] button: 

• 

Previous track (quickpress)

                             •

 Decrease volume (hold)

2. [        VOL+] button: 

• 

Next track (quickpress)

                                

•

Increase volume (hold)

3. [        ] button: Power ON/OFF
4. Indicator light
5. [ PLAY/PAUSE ] button: Play/Pause music
6. [ Connect ] button: Connect to Bluetooth
7. Audio socket
8. Mini USB charging port

Should you have any questions or problems concerning this 
product, please contact our customer service department at:

        Customer Support:
         1-877-768-8483 (Toll Free)
         cs@southerntelecom.com

        Monday – Friday: 8AM – 10PM (EST)

        www.southerntelecom.com

● Provide proof of the date of purchase within the package 

    (Dated bill of sale).

● Prepay all shipping costs to the authorized service center,  

    and remember to insure your return.

● Include a return shipping address (no P.O. Boxes), a 

    telephone contact number, and the defective unit within 

    the package.

● Describe the defect or reason you are returning the 

    product.

Your product will be repaired or replaced, at our option, for 

the same or similar model of equal value if examination by 

the service center determines this product is defective. 

Products received damaged as a result of shipping will 

require you to file a claim with the carrier.

The shipping address of the authorized service center is:

 Southern Telecom, Inc.
        Attention: Customer Service (2nd Floor)
        14-C 53rd Street
        Brooklyn, NY 11232

In the unlikely event that this product is defective, or does 

not perform properly, you may within ninety (90) days from 

your original date of purchase return it to the authorized 

service center for repair or exchange.

FCC Part 15:
This equipment has been tested and found to comply with the 
requirements for a Class B digital device under Part 15 of the Federal 
Communications Commission (FCC) rules. These requirements are 
intended to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from 
that 
   to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Do not attempt to repair or modify this equipment.
Warning: Changes or modifications to this equipment not expressly 
approved by the party responsible for compliance could void the 
user’s authority to operate the equipment.
“This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
      interference that may cause undesired operation.”

Warranty service not provided

This warranty does not cover damage resulting from 

accident, misuse, abuse, improper installation or operation, 

lack of reasonable care, and unauthorized modification. This 

warranty is voided in the event any unauthorized person 

opens, alters or repairs this product. All products being 

returned to the authorized service center for repair must be 

suitably packaged.

Limitation of Warranty:

• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY 

APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, 

EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES 

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 

PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR 

WRITTEN  INFORMATION GIVEN BY AIT, INC. IT’S AGENTS, OR 

EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY 

INCREASE THE SCOPE OF THIS WARRANTY.

• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS 

WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. 

AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSE-

QUENTIAL DAMAGES RESULTING FROM THE USE OF THIS 

PRODUCT OR ARISING OUT OF ANY BREACH OF ANY 

EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS 

DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE 

GOVERNED BY THE LAWS OF THE STATE OF NEW YORK. 

EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, 

ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS 

FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED 

TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion nor limitation of 

incidental or consequential damages, or limations on how 

long an implied warranty lasts so the above limitations on 

exclusions may not apply to you. This warranty gives you 

specific legal rights, and you also may have other rights that 

vary from state to state.  

Bluetooth Speaker

Bluetooth Speaker

1 2

3

4

5 6

7

8

1. Turn the speaker on by pressing the [      ] Power 

    ON/OFF button. If you’re using the speaker for the 

    first time, press and hold the [      ] Power ON/OFF 

    button to turn the system on. After 4 seconds the 

    audible signal is emitted. 
2. The Indicator light will flash BLUE twice, followed 

    followed by a RED flash. 
3. Press the [ Connect ] button. The Indicator light 

    will flash BLUE and RED.
4. Keep the speaker and Bluetooth enabled device  

    within 3 feet of each other during the pairing 

    process.
5. Set your mobile phone or other Bluetooth 

    enabled device to search for Bluetooth devices.

within 3 feet

Safety and operating instructions should be retained

for future reference.

• Refer all servicing to qualified service personnel. 

  Servicing is required when the unit has been

  damaged, such as the power supply cord or plug is 

  damaged, liquid has been spilled or objects have

  fallen into the unit, or the unit has been exposed to 

  moisture.

• To reduce the risk of fire or electrical shock, do not 

  expose this product to rain or moisture. The unit must

  not be exposed to dripping and no object filled with

  liquids, such as a vase, should be placed on the unit.

• Please keep the unit in a well-ventilated environment.

• No naked flame sources such as candles should be 

  placed on the unit.

• Disposal of this product should be in accordance with

  local regulations. If you are not sure how to proceed,

  contact your local authority.

• Clean only with a slightly moist, lint-free cloth.

• Do not install near any heat sources such as

  radiators, stoves or other apparatus that produce

  heat.

• Only use attachments/accessories specified by the

  manufacturer.

Cable Connection
To listen to music using a wired connection, connect 
your music device to the audio port using the 
included audio cable.

NOTE:  The Audio port does not work as a headphone
jack. Whenever you connect the audio cable, the 
status indicator will light up BLUE. The functions on 
the speaker will not work with the cable connected.

Answering / Ending a call
Use the native controls on your mobile phone to 
answer and end a call.

To make a call
Dial the number and press the send button on your 
mobile phone. The call is automatically transferred to 
the speaker.

Receiving calls
When receiving a call, the music will stop playing 
automatically. You can transfer the call from the speaker 
to your phone, or you can power off the speaker for a 
private conversation.  Once the call has ended, use your 
mobile phone to continue music playback.

To enjoy wireless music on your Bluetooth 
Speaker, make sure you are connected to a 
Bluetooth enabled device.  Once connected you 
can press PLAY on your Bluetooth device or you 
can press the [         ] button on the SBT602 
Bluetooth Speaker.  

Once playback has begun, you can control the 
music or answer phone calls from the control 
buttons of the Bluetooth speaker (with devices 
that have the AVRCP Bluetooth profile).

Adjusting the volume
Press and hold the [       VOL+] button to increase the 
volume and the [      VOL-] button to decrease it to 
your desired level.

On an iPhone

• Go to SETTINGS > GENERAL > BLUETOOTH 

   (Make sure Bluetooth is turned ON)

• Go to SETTINGS/OPTIONS > BLUETOOTH 

• Enable BLUETOOTH

Bluetooth:
Discoverable:

Paired Devices

SBT602

Bluetooth

3G

On

Yes

Add New Device

On an Android Phone

• Go to SETTINGS > BLUETOOTH > MENU >  

  Search 

Bluetooth settings

Bluetooth devices

Scanning

Bluetooth 

Device name

SBT602

Visible

Search for devices

Make device visible

12:12 PM

On other Cell Phones/Devices

• Review the instruction manual that came   

  with your phone/device.

Searching for devices

Paired Devices:

1 f

ound

Stop

 *Empty *

Bluetooth: Enabled

6. When the Bluetooth enabled device finds the  

    speaker, select SBT602 from the list of found 

    devices. 
7. If required, enter the password 0000. Select OK 

    or Yes to pair the two units.
8. After a successful registration, the LED Indicator 

    light will flash BLUE. 
Note: If the speaker has already been connected 

to the Bluetooth device/phone, press the Power 

button on the speaker for 4 seconds to turn on the 

speaker again. The speaker will reconnect with the 

Bluetooth device/phone automatically. 

RF warning statement:
The device has been evaluated to meet general RF exposure
 requirement. The device can be used in portable exposure 
condition without restriction.