Trans Electric Co. Ltd. DAS200 Benutzerhandbuch
Installation
TX
Listen to the internet radio or MP3 files
on Computer.
DAS-200 Transmitter is used as a external
speaker of your PC or Notebook, the audio
from PC will transmit by 2.4GHz signal to
Receiver.
speaker of your PC or Notebook, the audio
from PC will transmit by 2.4GHz signal to
Receiver.
RX
Connect 3.5mm to RCA RL audio cables, 3.5mm end to the audio output on the
back panel of DAS-200 Rx, RCA RL to the audio input of your audio amplifier.
Connect the barrel end of AC/DC adaptor to the DC input of the back panel of
DAS-200, AC end to your AC outlet
back panel of DAS-200 Rx, RCA RL to the audio input of your audio amplifier.
Connect the barrel end of AC/DC adaptor to the DC input of the back panel of
DAS-200, AC end to your AC outlet
Operation
Step 1. Please check the power is ok in either
Tx( the blue-ray LED will lighted on when
Plug into USB port )or Rx.
Plug into USB port )or Rx.
Step 2.Push the button on the Tx (as figure 1)
to select desired channel(the Receiver
can auto scan the channel that Tx has)
can auto scan the channel that Tx has)
Step3. Turn on the audio amplifier at the Rx site
to check the audio quality, if there is some
interference occurred, the sound will has
some zigzag and buzz. At this time, you
need to choose another channel as Step2
to make sure that the audio quality is crystal clear.
interference occurred, the sound will has
some zigzag and buzz. At this time, you
need to choose another channel as Step2
to make sure that the audio quality is crystal clear.
Step4: open your mind to enjoy.
2
figure 1
Audio Cable
Receiver
AC/DC Adaptor
Stereo speaker