Microsoft Corporation KB11 Benutzerhandbuch
3
Connecting the Wireless Transceiver
The Microsoft Wireless Transceiver for Bluetooth must be connected
to an available Universal Serial Bus (USB) port on your computer. For
desktop computers, it is recommended that you use the Wireless
Transceiver base stand. A notebook USB cable is included for
notebook computers.
to an available Universal Serial Bus (USB) port on your computer. For
desktop computers, it is recommended that you use the Wireless
Transceiver base stand. A notebook USB cable is included for
notebook computers.
Important You must install the software first, as specified in Step 1,
before connecting your hardware devices.
before connecting your hardware devices.
To connect the Wireless Transceiver using the desktop USB cable
1 Gently insert the Wireless Transceiver into the base stand.
2 With your computer turned on, plug the rectangular USB connector attached to the base
stand into your computer’s rectangular USB port.
To connect the Wireless Transceiver using the notebook USB cable
1 Gently connect the notebook USB cable to the Wireless Transceiver.
2 With your computer turned on, plug the rectangular USB connector into your computer’s
rectangular USB port.
Inserting the Batteries
The keyboard and mouse each require two batteries, which are included in the package.
Whenever you insert batteries, always make sure both of them are new. Alkaline batteries
are recommended.
Whenever you insert batteries, always make sure both of them are new. Alkaline batteries
are recommended.
To insert the batteries
1 Turn the device upside down, and then remove the battery compartment cover.
2 Insert new batteries, making sure to properly orient the positive (+) and negative (–)
ends as specified by the battery compartment labels.
3 Close the battery compartment cover.
Important Before boarding any aircraft, remove the batteries from the wireless keyboard
and mouse. The wireless keyboard and mouse can transmit radio frequency (RF) energy,
much like a cellular telephone, whenever batteries are installed and either a key is pressed
on the keyboard or the mouse is moved.
and mouse. The wireless keyboard and mouse can transmit radio frequency (RF) energy,
much like a cellular telephone, whenever batteries are installed and either a key is pressed
on the keyboard or the mouse is moved.
Troubleshooting
For optimum performance, position the Wireless Transceiver as far away as possible from
any items that might cause interference. Items that might cause interference include:
microwave ovens, wireless networking devices, and certain types of cordless phones.
any items that might cause interference. Items that might cause interference include:
microwave ovens, wireless networking devices, and certain types of cordless phones.
The keyboard or mouse may work up to 30 feet (9.1 m) away from the receiver. This
distance varies depending on the positioning of the receiver and wireless devices, nearby
items causing interference, and other factors.
distance varies depending on the positioning of the receiver and wireless devices, nearby
items causing interference, and other factors.