Seiko Instruments AB000003 Benutzerhandbuch

OPERATING PRECAUTIONS

Please follow the precautions below to enjoy and maintain the full performance of the
printer.

Using the Printer

 Be careful not to drop or bump the printer on a hard surface.
 DO NOT install the printer in direct sunlight or such areas. Suitable environment for

the use of the printer is as follows:

· Ambient temperature: 14

F to 122F (-10C to 50C)

· Relative humidity: 30 to 80

RH (noncondensing)

 DO NOT install the printer near devices that generate strong electromagnetic fields

such as a copy machine.

 DO NOT install the printer in a location that is subject corrosive gas or siloxane and

so on.

 DO NOT connect the AC cables of the AC adapter and the battery charger to the

same outlet with devices that generate noise.

 DO NOT open the paper cover during printing.
 DO NOT remove or reinstall the interface cable during printing or transmission. DO

NOT touch the connectors of the interface cable during printing.

  Switch the power off when not in use.
   Clean the printer using soft, lint-free cloth. DO NOT use alcohol or other solvent.
  Before use, always clean the terminals using a dry, soft, lint-free cloth. If the

terminals are dirty, it may not be possible to obtain proper contact.

 When cleaning the TH, wipe the thermal head with a cotton swab or other soft

material.

 Remove the battery pack from the printer if the printer is not used for a long time. If

not, it may cause overdischarge and shorten life span of the battery pack.

 Store the battery pack in cool place. DO NOT store the battery pack for long time

with fully charged condition because it may shorten life span of the battery pack.

 The battery pack should be recharged at 32 to 95°F (0 to 35°C) for optimum

performance.

 The AC adapter, the battery charger and the battery pack may become warm when

in use. This is normal and is not a malfunction.

 When the battery pack is used at low temperature, the length of time the printer can