Dongbu Daewoo Electronics Corporation DPA42A2GMBD Benutzerhandbuch
Selection of TV/VIDEO
Input Signal
Input Signal
30
- When pressing TV/VIDEO button on the remote controller screen changes as follows:
TV => Video1(S-Video1) => Video2(S-Video2) => TV
Note:
• If S-video and RCA jack are connected at the same time, the TV set will only detect the S-Video mode.
• If sound signal is mono method, connect it to the L-terminal of the sound input terminal.
• If S-video and RCA jack are connected at the same time, the TV set will only detect the S-Video mode.
• If sound signal is mono method, connect it to the L-terminal of the sound input terminal.
Air
26
Video1
Video2
When watching video, Camcorder, DVD, Cable TV with External Input
1. Press the “TV/VIDEO” button on the remote controller.
• Screen changes as follows whenever pressing the “TV/VIDEO” button.
TV => Video1(S-Video1) => Video2(S-Video2) => TV
• Screen changes as follows whenever pressing the “TV/VIDEO” button.
TV => Video1(S-Video1) => Video2(S-Video2) => TV
DISPLAY
GUIDE
TV/VIDEO
MULTIMEDIA
POWER
1
2
3
4
5
6