Fujitsu CFBIPAD Benutzerhandbuch

iPAD Operations Guide 

 
 

Copyright 2003 by Fujitsu Transaction Solutions Inc.

 

Confidential

 

18

You can simultaneously charge main batteries mounted on a single-pack charger and in the 
iPAD mounted on a cradle. 
A single-pack charger (CA05951-7080), cradle (CA05951-7139), AC adapter (CA05306-
D500), and a daisychain cable (CA72001-1895) are required for this operation. 

 

 

(1)  Using the daisychain cable, connect the AC adapter connection interface of the single-

pack charger to either the left or right AC adapter connection interface on the cradle. 
The cable can be connected to either of the two AC adapter connection interfaces 
provided on the cradle. 

(2)  Connect the AC adapter to the unused AC adapter connection interface on the cradle. 
(3)  Plug the AC cable of the AC adapter into a wall outlet. 
(4)  Turn off the iPAD. 
(5)  Insert the iPAD with the main battery installed into the cradle until you hear a click. 
 

 Charging starts. 

 
During charging, the LED is on and is orange.  When charging is completed, the LED changes 
to green. 
The charging time for the two is about 2.5 hours. 
 

Note  

  Gently mount the iPAD on the 

cradle to prevent malfunctioning of 
the iPAD and cradle. 

  If the LED does not light, make 

sure that the iPAD is correctly 
mounted on the cradle. 
 

 

 

  The LED will not light if the main 

battery is not correctly mounted on 
a single-pack charger. 

 
⌦ This completes the operation.