Fujitsu CFBIPAD Benutzerhandbuch
iPAD Operations Guide
Copyright 2003 by Fujitsu Transaction Solutions Inc.
Confidential
28
(1) As directed on the screen, tap the center of the crosshairs (+) using a stylus.
You will need to tap the center and the four corners of the screen.
(2) After you have tapped all the correct locations, the crosshairs disappear and the message
“Tap the screen to register save data" is displayed. Tap the screen to register the
correction settings. To cancel the operation, press the [CLR] key while holding down the
[SFT] key.
correction settings. To cancel the operation, press the [CLR] key while holding down the
[SFT] key.
Note
If you tap a location away from the
crosshairs, you will be required to start the
operation again from the beginning.
operation again from the beginning.
Do not press the Power key while the touch
panel correction tool is running. Doing so
will nullify the touch panel correction
settings, and the touch panel correction will
have to be done again.
will nullify the touch panel correction
settings, and the touch panel correction will
have to be done again.
If the battery loses its charge during touch
panel correction, charge or replace the
battery, then perform touch panel
correction again.
battery, then perform touch panel
correction again.
Use a stylus. Do not tap the screen with a
pencil, ballpoint pen, or any other pointed
object. Doing so may scratch or crack the
screen.
object. Doing so may scratch or crack the
screen.
Do not touch the screen with your palm
while you are tapping the screen.
⌦
This completes the operation.