Fujitsu DP050M33111A1 Benutzerhandbuch

In case that an Ethernet interface board is installed, this equipment complies with
EMI regulations as follows:

Notice: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.  These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.  This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.  Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the
interference at his own expense.

FCC warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.

Notes
• The use of a non-shielded interface cable with the referenced device is prohibited.

The length of the parallel interface cable must be 3meters (10feet) or less.  The
length of the Ethernet interface cable must be 100meters (328feet) or less for type
10BASE-2 and 185 meters (607 feet) or less for type 10BASE-T.

• The length of the power cord must be 3 meters (10 feet) or less.

This class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.

Cet appareil numérique de la Classe A respecte toutes les exigences du Règlement sur
le matériel brouilleur du Canada.

Warning:  This is a product which meets Class A of EN55022 and AS/NZS3548.
In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.