Fujitsu DP050M33111A1 Benutzerhandbuch

To install the RAM card, first make sure the printer is turned off and
follow these steps:

1. Open the upper door and

remove the right side
cover of the printer. To
remove the right side cover,
remove the two screws and
open the front of the cover
while pushing it backwards.
You will see a connector
cover on the metal plate.

2. Remove the connector

cover. Remove the fastening
screw and the cover. You
can now see three
connectors (upper two ivory
ones for RAM cards).

You can install two memory expansion cards. The expansion card
can have 4, 8, 16, or 32 megabytes of RAM. Together with the
printer’s resident memory (4 megabytes for 12M and 8 megabytes
for 12MX), these expansion options offer a range of RAM from 4 to
68 (12M) or 72 (12MX) megabytes.

Insert with cut
facing down and
to the right

(8MB card)