Digital Monitoring Products Inc PC0114 Benutzerhandbuch

Seite von 6
INSTALLATION GUIDE
1100XH High Power Wireless Receiver
Description
The 1100XH High Power Wireless Receiver provides two-way, supervised communication using 900 MHz frequency 
hopping-spread-spectrum technology.  The receiver provides additional transmit and receive amplification for 
improved performance at greater distance or harsh building environments.  The receiver can be hard-wire mounted 
up to 1,000 feet from the panel enclosure and provides up to 500 wireless zones for XR500 Series Command 
Processor™ panels and up to 100 wireless zones for XR100 Series Command Processor™ Panels.   
What is Included
The receiver includes the following items:
•  One Model 1100XH High Power Wireless Receiver
•  Hardware pack  
Compatibility 
The 1100XH is compatible with any XR500 Series Command Processor™ panels using firmware Version 113 or higher 
and XR100 Series Command Processor™ panels.  No specific receiver programming is required.  Once installed, a 
panel programmed with wireless information automatically recognizes the wireless receiver.  The system is designed 
so only one 1100 receiver is used per panel.
Installing the Wireless Receiver
Choose an optimum location to mount the receiver.  The receiver is typically mounted at a distance not to exceed 
1000 feet away from the panel enclosure.  A location should be selected that will be centrally located between the 
1100 Series transmitters used in the installation.  Install the receiver away from large metal objects.  Mounting the 
receiver on or near metal surfaces impairs performance.  Do not use shielded wire between the panel and receiver.  
When selecting the proper mounting location of a transmitter, refer to the LED Survey Operation section.
Remove the cover from the plastic housing by squeezing both sides toward each other.  Secure the receiver to the 
wall in the desired location installing the supplied screws in the mounting hole locations as shown in Figure 1.  Snap 
the cover back on the unit.  The panel immediately recognizes the 1100XH Receiver if the panel is programmed with 
a house code.  
���
���
�����
�������������
��������������
������
����������
�����������
��
��
���
�������������
���������
����
����������
������������
�����������
������������
�����������
��������
��������������
Figure 1: Receiver PCB