Honeywell International Inc. 7722TX Benutzerhandbuch

 check 

should be 

performed after a zone sensor has

been 

mounted and the 

 installed. The cover must be

sensor is equipped with a temperature control, set the

control dial with 

 in 

 position.

Press either one   the two pushbutton 

switches on 

 upper

 side of 

the sensor. The green LED near the bottom   the

circuit board should flash each 

time the pushbutton is

pressed. If it does not, 

check that both batteries are good and

 property seated in the holders.

In normal use, the green LED will Hash each time the zone

transmits a message, 

 several minutes apart.

771211 

 

 

W i i h :   5 ’
Depth:

 

 

 mounting plate).

 x 127mmW x 33mmD)

Range:

Nominal 

 feet fine-of-sight, indoors.

Two 

 Lithium Batteries.

Use only 

 No. 

 7010, Panasonic

 Duracell 1234 or Sanyo 

 for

replacement.

Risk of fire, explosion and 

 Do not

or 

 

 of 

CHANGES OR 

 MAOE TO THIS 

 WHICH ARE

NOT EXPRESSLY APPROVED BY THE AGENT FOR THE 

 COMPANY

RESPONSIBLE FOR COMPLIANCE WITH FEDERAL REGULATIONS COULD

 THE USER’S AUTHORITY TO OPERATE THIS EQUIPMENT.

THE 

 COMPANY,

Commercial Systems Group

3600 

 Creek Road,

Lacrosse, WI 54602

Copyright 

0