N. V. Nederlandsche Apparatenfabriek NEDAP MACESMART Benutzerhandbuch
MACE SMART | INSTALLATION GUIDE
Reader configuration
16/34
4.3.2 LED/BUZZER
LED and buzzer mode *
Automatic
MACE reader will automatically set the LED color and optionally beep upon
identification. The LED color upon identification and during idle can be configured.
Remote (follow digital inputs)
The connected access control panel may control the LED and buzzer using the digital
inputs. The corresponding LED colors can be configured. See chapter 3.3.
Direct (using serial commands)
The connected access control panel may control the LED and buzzer using
commands on the serial interface. Details are described in the firmware manual.
LED brightness
Set LED brightness in range from 0 to 100%. Default 50%.
* Using OSDP the LED and buzzer are controlled using the OSDP_LED and
OSDP_BUZ commands. The Automatic mode and Remote control (follow digital
inputs) settings are not supported.
inputs) settings are not supported.