Axcera 79XITS-7045 Benutzerhandbuch
WaveCom Electronics Inc
MA4040D Manual; MAN1L0901 REV 13(0104)
Approved: D.P.
49
C3.2 MA 4050
From the Menu Selection Bar, click on MA 4050 and select Demo. The following window will open:
C3.2.1 MA4050 Utility Description
Communications Section:
You will need to select the appropriate slot position of the MA4050x module that you wish to control. Looking at the
FRONT of the MA4002x Chassis, the slot positions are labeled A though J from left to right.
The password is not required for normal operation of the program.
FRONT of the MA4002x Chassis, the slot positions are labeled A though J from left to right.
The password is not required for normal operation of the program.
Unit Parameters Section:
The Unit Parameters are read from the MA4050x board. Clicking the UNIT PARAMETERS button will update this
section:
SERIAL NUMBER
section:
SERIAL NUMBER
Serial number of MA4050x PCB
HARDWARE REV
Hardware revision number of MA4050x PCB
SOFTWARE REV
Revision of software in MA4050x microcontroller
UNIT SELECTED
Type of unit selected - this should read MA4050
FREQ OPTION
(Informational Only) Indicates VARIABLE or FIXED IF frequency selection.
This option is loaded at the factory. Selecting VARIABLE will allow the IF frequency to
be varied with 100 Hz resolution. Normally it is set to FIXED since a fixed frequency
SAW filter is used in the MA4050x.
This option is loaded at the factory. Selecting VARIABLE will allow the IF frequency to
be varied with 100 Hz resolution. Normally it is set to FIXED since a fixed frequency
SAW filter is used in the MA4050x.
INTERFACE OPTION
This will indicate the data interface selected. Options are ASI, ASI 188, ASI 204, DVB
Ser, or DVB Par.
Ser, or DVB Par.