Williams Sound DLT300 Benutzerhandbuch

9

Depending upon the mode chosen, up to six people can talk in a group at any given time. The M1 will have first priority, M2 has 

second priority and Guest units have third priority. The M1 or M2 will have to turn off their TALK button to allow the Guest units to 

talk. When two or more people are talking in a group, the participants can hear their voices with the DLTs or DLRs.
The M1 and M2 have the ability to lock out other talkers by holding down the TALK button for three seconds. All system TALK 

LEDs will continuously flash while other participants are locked out of the TALK feature.
There are 4 basic steps to programming a Digi-Wave system.

In 2-way mode, DLTs can hear and talk to each other, just like having a phone conversation or a conference call.  DLRs can 

listen to the conversation.  Common applications include: Tours with multiple Tour Guides, Tours with audience participation 

(Q&A), Wireless Intercom, Portable Discussion and Personal Communication.

There are (3) 2-way Modes represented by these symbols on the LCD Display:
2-way:  
2-way - Listen only:  
2-way - Intercom:  

Rules of Operation (2-way modes) 
The following rules must be followed.  Failure to adhere to these rules will result in unpredictable, unsupported operation.  

• There must be one, and only one Master 1 (M1) per group.
• If the M1 unit is off, the Master 2 and Guest units will turn off after a few minutes.
• Master 2 is optional and there can only be one per group.
• Each DLT must have its own address and the address cannot be duplicated within a group.
• Maximum two Talkers can operate simultaneously within a group.
• Maximum four Groups can operate simultaneously within the same area, but each group must be assigned its own group 

number.

• When using four simultaneous groups, group numbers must be sequential. i.e. 11, 12, 13, 14. Any numbers 0-1023 can 

be used.

• Attendee count will only work with addresses 1-99 (Maximum 100 DLT’s with one Master 1 at address 0).
• With Secure Key Code active, all DLTs within the group must have the same 4-digit code entered. (DLRs will not work 

with secured DLTs)

In 1-way mode, DLTs listen to a speaker using a DLT, but they cannot communicate back to that speaker - instead they 

communicate to DLRs. The most common applications are: Simultaneous Interpretation with one or more interpreters, or 

Tours without audience participation (no Q&A).

There are (4) 1-way Modes represented by these symbols on the LCD Display:
1-way - Main Speaker:  

1-way - Interpreter:  
1-way - Repeater Mode:  

1-way - Listen Only: