NBS Payment Solutions Inc. NOIRE510H1 Benutzerhandbuch
510H1
Wireless Terminal
USER GUIDE
NBS Payment Solutions Inc.
Corporate Headquarters - Canada
703 Evans Avenue, Suite 400
Toronto, Ontario, M9C 5E9
Canada
Tel: +1 416 621-7410
Fax: +1 416 621-2450
Fax: +1 416 621-2450
510H1 User Guide
UNPACKING THE
510H1
Carefully preserve the packaging of the terminal. It must
be re-used whenever the terminal is shipped.
be re-used whenever the terminal is shipped.
Packaging contains:
The terminal itself, equipped with its paper roll.
Detachable power supply unit. (The power supply unit
The terminal itself, equipped with its paper roll.
Detachable power supply unit. (The power supply unit
delivered with your terminal is specially designed for
it. Do not use any other power supply.) The use of a
power supply having apparently similar
power supply having apparently similar
voltage/current characteristics may, in spite of this,
damage your terminal.
damage your terminal.
Battery.
Installation Guide.
Installation Guide.
SAFETY INSTRUCTIONS
To power down the
510H1:
Disconnect the power supply block from the
electric power supply network.
Press and hold the
key until the display
shuts off.
Electrical power supply network
Provide an A.C receptacle that meets the following
Provide an A.C receptacle that meets the following
recommendations:
Connector is installed near the equipment and is
Connector is installed near the equipment and is
easily accessible
CHARGING THE TERMINAL
Select an electrical socket that complies with the general
safety instructions as outlined in “Safety Instructions.”
safety instructions as outlined in “Safety Instructions.”
Connecting the Power Supply to the Optional Base
Insert the small
connecter on the
power supply cable
into the socket at the
back of the optional
into the socket at the
back of the optional
charging base.
To charge the
terminal, gently place
the terminal on to the charging base.
the terminal on to the charging base.
Connecting the Power Supply directly to the
510H1
Insert the small
connector on the
power supply cable
power supply cable
with the triangle
facing up, in to the
facing up, in to the
centre socket on the
back of the
back of the
510H1 terminal
The terminal will
automatically power
on and start to
charge.
charge.
To decrease the charging time, the terminal may be
powered off by pressing the
key until the display
shuts off.