Alps Electric WK1A026 Benutzerhandbuch
The connector is arranged as shown in the figure below
■CAUTION■
Operating temperature
range
-40~＋85 degree C
MAX 1.0mA(@12.5V 25℃) at standby
Weight
Please DO NOT the following. Engine is not started by failure of electronic
parts. (Product can not receive the signal correctly)
parts. (Product can not receive the signal correctly)
Pay attention to the following.
(The operation range might be changed by the environment. )
(The operation range might be changed by the environment. )
・Do not contact and bring metals close to the engine SW and the key.
・It may not be operated when using the equipment of the same
frequency band in the vicinity.
frequency band in the vicinity.
0.049kg
Consumption current
spec
MAX 200mA(@12.5V 25℃) at operation
User's Manual
It communicates with IC used both as Transponder and Passive RKE
through LF ANT(Z axis) of I-key H/U, and operates as ANT to exchange
communication data depending on community signal with BCM.
through LF ANT(Z axis) of I-key H/U, and operates as ANT to exchange
communication data depending on community signal with BCM.
The immobilizer antenna communicates with the transponder in the hand unit
when the hand unit is brought close, and receives the code of the key. The
immobilizer is used by bringing the hand unit close as shown in figure.
when the hand unit is brought close, and receives the code of the key. The
immobilizer is used by bringing the hand unit close as shown in figure.
Product name : Immobilizer base station
Type : TWK1A026
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
compliance could void the user’s authority to operate the equipment.
Size
・Give a shock.
・Get it wet. If it got wet, wipe and dry up.
・Disassembly and modification.
・Get it wet. If it got wet, wipe and dry up.
・Disassembly and modification.
This device complies with Part 15 of FCC Rules and Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of
this device.
exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of
this device.
Operation of frequency
125kHz
DC6V～16V
AC/DC Supply
Operating voltage
DC6～16V(Inner:DC 5V)
DC12V
Range of voltage
Consumption current
Under 1.0mA（Standby current）
W40.2xL70xH40.2（mm）
HUND UNIT
Immobilizer base station
CONNECTOR PIN LAYOUT
NAME