3M Company DSS7210 Benutzerhandbuch
3M™ SelfCheck™ System Models 6210 and 7210
Quick Start Guide
4
©3M April 2000
Replace the Printer Paper
When the printer paper runs out, you will need to replace the depleted roll with a new roll of paper. Before
beginning this procedure, open the right side panel. To replace the paper roll:
When the printer paper runs out, you will need to replace the depleted roll with a new roll of paper. Before
beginning this procedure, open the right side panel. To replace the paper roll:
1.
Slide the printer assembly out of the chassis.
2.
Locate the print head lever and move the
lever from the Engaged position to the Full
Release position.
lever from the Engaged position to the Full
Release position.
3.
Lift the empty paper roll and roll pin out of
the printer assembly.
the printer assembly.
4.
Remove the paper roll from the roll pin.
5.
Place a new paper roll on the roll pin.
6.
Place the paper roll and roll pin on the
printer assembly with the tag end of the
paper coming off the bottom of the paper
roll.
printer assembly with the tag end of the
paper coming off the bottom of the paper
roll.
7.
Feed the leading end of the paper roll into
the printer assembly. Be sure the end of the
the printer assembly. Be sure the end of the
paper roll is not ragged or it will not feed
properly.
properly.
8.
Press the line feed button on the side of the
printer assembly until the paper feeds
completely through the print head area of the
printer.
printer assembly until the paper feeds
completely through the print head area of the
printer.
9.
Move the print head lever from the Full
Release position to the Engaged position.
Release position to the Engaged position.
10.
Tear off any excess paper.
11.
Slide the printer assembly back into the
chassis.
chassis.
12.
Close the side panel.
3M Library Security Systems
3M Center, Building 225-4N-14
St. Paul, MN 55144-1000
1-800-328-0067
3M Center, Building 225-4N-14
St. Paul, MN 55144-1000
1-800-328-0067
Printed in U.S.A.
In Canada, 519-451-2500
75-0500-4198-9