Computime Limited AEP3081 Benutzerhandbuch
8
System menu
To join a network and connect to the utility company:
Note: The utility company installer typically performs this
function.
Note: The utility company installer typically performs this
function.
1. Enter the ‘System’ menu.
2. The initial default status should be “No Network”. The
2. The initial default status should be “No Network”. The
Channel can be manually set or “Auto” can be used
to automatically set the channel.
to automatically set the channel.
3. Press (2) to scan and join a network.
4. The status will update and show ‘Joined Network’ if it
4. The status will update and show ‘Joined Network’ if it
successfully connects to your utility meter. It will
display ‘Joined Failed’ if your connection was
unsuccessful. It takes approximately one –two
minutes for the connection process to complete. If you experience problems connecting to your utility
network, please contact your utility company.
display ‘Joined Failed’ if your connection was
unsuccessful. It takes approximately one –two
minutes for the connection process to complete. If you experience problems connecting to your utility
network, please contact your utility company.
To disconnect from a network:
1. Enter the ‘System’ menu.
2. ‘Lv Nwrk’ appears on the screen. Press (2) to exit the
2. ‘Lv Nwrk’ appears on the screen. Press (2) to exit the
network.
3. ‘Leave Network’ appears on screen
4. To prevent inadvertent service calls, the key sequence
4. To prevent inadvertent service calls, the key sequence
to leave the network is only available from the utility
company.
company.
5. Press back (1) to quit and return to the previous screen.
Note: PANID/Extern PANID/E01 Address/VERSION – are all codes that you may be asked to supply if you phone
to the utility company for technical support.
to the utility company for technical support.