NEC Corporation 07208901 Benutzerhandbuch
66
Cable Work
G
1
The recommended tightening torque is 4 N•m.
2
When connecting the FG cable, connect it so that it would take the shortest way to the ground point
in the office.
in the office.
2
To prevent loosening, it is recommended to protect the connector on the eNB equipment + pan-head screw to the
FG line (so that the FG line side crimping terminal is completely covered) with outdoor weather-proof tape.
FG line (so that the FG line side crimping terminal is completely covered) with outdoor weather-proof tape.
G
Apply protection after checking the voltage referring to section
. If protection is applied before checking
the voltage, some voltage check procedure cannot be performed.
Figure 49
Crimping Terminal Mounting Screw Protection Example