Wyse Technology 62230WL Benutzerhandbuch
24
Chapter 4
Configuring WDM Properties
Use the WDM Properties dialog box (Control Panel > WDM icon) to configure the Wyse
Device Manager server location and thin client settings.
1.
Configure Server settings:
• Enter the IP Address or hostname of the WDM server.
• Enter the Port to use (default is 80).
• (Optional) If you are using HTTPS, enter the Secure Port to use (default is 443).
• Enter the IP Address or hostname of the WDM server.
• Enter the Port to use (default is 80).
• (Optional) If you are using HTTPS, enter the Secure Port to use (default is 443).
2.
Configure Client settings:
• Enter the Server Connection Retry Attempts (number of attempts to connect to the
• Enter the Server Connection Retry Attempts (number of attempts to connect to the
WDM server after a failed attempt).
• Enter the Interval Between Retry Attempts (number of seconds between attempts to
connect to the WDM server after a failed attempt).
3.
Click OK.
For information on Wyse Device Manager software, see "Using Wyse Device Manager
Enabling and Disabling Automatic Logon Using Winlog
Automatic logon to a user desktop is enabled on the thin client by default. Use the Winlog
dialog box (Control Panel > Winlog icon) to enable or disable Auto Logon, and to change
the default User name, Password, and Domain for a thin client.
Caution
To save the settings so that they persist after a thin client reboot, be sure to
flush the files of the File Based Write Filter cache (see "Before Configuring