Wyse Technology 62230WL Benutzerhandbuch

Additional Administrator Utility and Settings Information

Reboot the thin client.

Enable the File Based Write Filter.

Reboot the thin client.

If you use the FBWF Enable icon to enable the File Based Write Filter, the 

second reboot will happen automatically.  

By default, the NetXClean utility will purge all but specifically selected profiles 

on the system when the thin client starts up or when the user logs off. For 

information on how to ensure a new profile is not purged by the NetXClean 

utility, see "Understanding the NetXClean Utility."

You can participate in domains by writing roaming profiles to the C drive. The profiles must 

be limited in size and will not be retained when the thin client is restarted.
For successful downloading and proper functioning, there must be sufficient flash space 

available for roaming profiles. In some cases it may be necessary to remove software 

components to free space for roaming profiles.

WinPing is used to launch the Windows PING (Packet InterNet Groper) diagnostic utility 

and view the results from pinging. To open the WinPing window, click Start > Run, enter 
WinPing

 in the box, and click OK.

WinPing is a diagnostic tool that sends an echo request to a network host. The host 

parameter is either a valid host name or an IP address. If the host is operational and on 

the network, it responds to the echo request. The default is to send 5 echo requests and 

then stop if no response is detected. WinPing sends one echo request per second, 

calculates round trip times and packet loss statistics, and displays a brief summary upon 

completion.
WinPing is used to:
• Determine the status of the network and various hosts.
• Track and isolate hardware and software problems.
• Test, measure, and manage networks.
• Determine the IP address of a host if only the host name is known.