PLANTRONICS INC M1100 Benutzerhandbuch

Seite von 4
PLT_M1100
MIX AND MATCH FOR BEST FIT
FIND YOUR GROOVE
TIPS
The loop of the gel eartip tucks into the back 
curve of your ear for a stable fit. 
Try on the headset. The eartip is positioned 
to suit most people, but you may want to 
rotate it to best fit your left or right ear.
The gel eartip and speaker click into matching 
grooves so the eartip doesn’t move out of 
place during use.
The loop on the gel eartip should point away 
from the headset. (Do not rotate the eartip 
too far.)
If the gel eartip feels loose or tight in your 
ear, then change it. To replace the medium 
gel eartip for small or large, pull the loop of 
the gel eartip to remove it. (Don’t pull on the 
speaker base and stem.)
Using your thumb, tuck the bottom of the 
eartip over the speaker and pull the loop of 
the eartip over the speaker. (Don’t push the 
speaker through the gel eartip.)
For best voice pickup, always check that the 
headset points towards the corner of your 
mouth.
VIDEO TUTORIAL:
www.plantronics.com/M1100fit
Listen to the Voice:
  This headset whispers various status 
alerts when you power on/off, run low on 
talk time or lose/reconnect the Bluetooth 
connection to your phone.
Stay Near Your Phone: 
  Bluetooth has a working “range” of up to 
33 feet between the phone and headset 
before audio degrades and the connection 
is lost.
Know How to Reconnect: 
  Your headset tries to reconnect a lost 
connection. If it can't, then tap the Call 
button once or manually reconnect via the 
phone's Bluetooth device menu.
© 2010 Plantronics, Inc. All Rights Reserved. Bluetooth is 
a registered trademark of Bluetooth SIG, Inc. and any use 
by Plantronics is under license. All other trademarks are 
the property of their respective owners.
Patents US 5,712,453; Patents Pending  
83987-31 (07.10)      AM83988-31
GET 
STARTED
Savor M1100
 
Bluetooth
®
 Headset
TAKE A GOOD LOOK
CONNECT TO YOUR PHONE
CALL BUTTON
•  Take a call or end it (1 tap)
•  Redial (2 taps)
•  Reconnect lost connection (1 tap)
•  Activate pairing after initial set up (press until LED flashes 
blue/red)
•  Transfer call to/from headset (1-second press during call)
POWER SWITCH
•  On (slide to reveal black) 
•  Off (slide to reveal red)
VOICE RECOGNITION BUTTON
•  Voice Recognition (VR) commands (Tap VR button, say a 
command within 10 seconds. See Tips for commands list.)
•  Initiate phone’s voice-dialing 
(2-taps then tone heard)
MICRO USB CHARGING PORT
•  With AC charger:
  20 minutes (1 hour talk time)
  Less than 2 hours (full charge)
•  Best performance when fully charged
VOLUME/MUTE BUTTON
•  Lo-Med-Hi-Max (1 tap per level change)
•  Mute: on/off (1-second press)
LED
•  Charging (Solid red. No light when fully charged)
•  Low battery (2 red flashes, 2 tones and voice alert)
•  Critically low (3 red flashes, 3 tones and voice alert)
•  Multipoint (on=2 blue flashes, and off=1 blue flash)
“Pairing” connects your headset to your 
phone. "Multipoint" technology lets you use 
this headset with two phones. (Read online 
user guide for details.)
1. READY
Activate the Bluetooth feature on your 
phone, then use the phone's settings to 
add/search/discover new Bluetooth devices.
iPhone: Settings > General > Bluetooth > On 
(starts the search for devices)
BlackBerry® smartphone: Settings/options > 
Bluetooth: On > Search for devices
VIDEO TUTORIAL FOR USA:
www.plantronics.com/pairing
2. SET
First Time:
With headset turned off, activate Bluetooth 
pairing mode by sliding Power switch on. The 
LED flashes blue/red to indicate pairing mode.
Pairing New Phone/Reconnecting Original:
Turn on the headset then press and hold the 
Call button until the LED flashes blue/red.
3. CONNECT
Select “PLT_M1100” from the list of Bluetooth 
devices shown on your phone.
If phone asks for a passcode, enter four 
zeros (0000). You may see 
****
 on screen.
Some phones also ask to confirm headset 
connection after pairing.
Headset LED will stop flashing blue/red once 
your phone and headset are successfully 
paired/connected.
Know How to Control the Headset:
You can give your headset a command, and it 
will whisper the answer or do what you say. 
First tap the VR Button then say:
  •  What Can I Say? 
  •  Pairing
  •  Am I Connected? 
  •  Check Battery 
  •  Redial
  •  Cancel
  •  Call Information (USA only; dials Bing 411
)
  •  Call Vocalyst
 (USA only)
  •  Answer (no need to tap VR first)
  •  Ignore (no need to tap VR first)
TIPS
NEED MORE HELP?
24-hour support in USA:
1-866-363-BLUE (2583)
Online user guide:
www.plantronics.com/documentation
FAQs:
www.plantronics.com/M1100faq
1-year limited warranty details:
www.plantronics.com/warranty
READY
SET
CONNECT
Z109
N10687
For Right Ear
For Left Ear
Optional 
earloop shown
Area covered
 by band
Project:  
GSG,  ACCORDION, PSD, M1100, EN
Date:  
07/21/10
Component: 
Accordion User Guide
File Name:  
83988-31_SAVORM1100_072110.
Art Master Number: 
83988-31
Part Number:  
83987-31
Scale:  1:1
Resolution:  300dpi
Placed Links:  N/A
Fonts:  
Gesta Light, Regular, Medium, Bold
Software:  CS3
Printing Method:  Offset Lithography
Inks and Finishes:
 
PMS 294C 
Overall UV Matte Varnish 
 
PMS 151
 
 
PMS Black C 
 
PMS 032C 
Notes: 
Original Designer:  Malika Henderson
E-mail:  malikaann@mac.com
Phone:  1 415 847 6083
Revisions:  Juliette Rys/Blanca Castaneda
E-mail:  juliette@rysartdesign.com
Phone:  1-831-684-2001
X