Tornado 9SYLTX2-1 Benutzerhandbuch
1N00-511 Genesis 80cm Boat Installation Manual - Export v1.0 08/03
©Tornado International Ltd. 2003
-16-
Confidential
Continuation of Installation Test:
1. Check that the red finish lights on all of the consoles are turned on (See
Dia. 16).
2. Turn the playtime control on the master timer to maximum (fully clockwise)
(See Dia. 7).
3. Open all of the cash doors.
4. Observing the credit displays introduce enough coins/tokens to purchase
4. Observing the credit displays introduce enough coins/tokens to purchase
one play. The credit display should show “1” and the green credit button
should flash. Repeat for each playing position.
should flash. Repeat for each playing position.
5. Press the green credit button, the credit display should now show “0” the
credit button stops flashing and turns on, the red finish light should turn to
green. Repeat for each playing position.
green. Repeat for each playing position.
6. At the end of the set time a sounder will be heard and the green play light
will return to red.
7. Insert a battery into each model. (See Dia. 13)
Caution!
Lift the rear of the model as the battery is slid into position to allow the
propellers to rotate.
8. Again introduce enough coins/tokens to purchase one play into playing
Caution!
Lift the rear of the model as the battery is slid into position to allow the
propellers to rotate.
8. Again introduce enough coins/tokens to purchase one play into playing
position “1”. The credit display should show “1” and the green credit button
should flash. Press the green credit button to trigger the game. Check that
the red finish light has turned to green.
should flash. Press the green credit button to trigger the game. Check that
the red finish light has turned to green.
9. Place model number 1 on the water. Move the forward/reverse stick to
forward. The model should move forward. Turn left and right to check that
the model responds correctly. Repeat for reverse. At the end of the play
period the green play light will turn to red and control will be removed from
the playing position.
the model responds correctly. Repeat for reverse. At the end of the play
period the green play light will turn to red and control will be removed from
the playing position.
10. Repeat the test for each model.
The unit is now ready for use.
The unit is now ready for use.
Appendix A
Dia. 16 – The Playing
Position