Uniden America Corporation UP001 Benutzerhandbuch
2
Do the following steps:
A. Choose the best location
C. Connect the base unit
B. Install the rechargeable battery pack into the handset
D. Choose the dialing mode
A.
Choose the best location
Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS
included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS.
Here are some important guidelines you should consider:
included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS.
Here are some important guidelines you should consider:
• Be sure there is sufficient space to raise the base antenna to a vertical position.
• The location should be close to both a phone jack and a continuous power outlet which
• The location should be close to both a phone jack and a continuous power outlet which
is not switchable.
• Keep the base and handset away from sources of electrical noise such as motors and
fluorescent lighting.
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.
B. Install the rechargeable battery pack into the handset
The handset is powered by a rechargeable battery pack. The battery recharges
automatically when the handset is placed in the base unit.
Charge the handset battery pack for at least 15-20 hours before using your new cordless
telephone for the first time! To maximize the charge capacity of your battery pack, DO NOT
plug the telephone cord into the base unit and wall jack until the battery is fully charged.
automatically when the handset is placed in the base unit.
Charge the handset battery pack for at least 15-20 hours before using your new cordless
telephone for the first time! To maximize the charge capacity of your battery pack, DO NOT
plug the telephone cord into the base unit and wall jack until the battery is fully charged.
NOTE: If your home has specially wired alarm equipment connected to the telephone line, be
sure that installing the system does not disable your alarm
equipment. If you have questions about what will disable your
alarm equipment, contact your telephone company or a qualified
installer.
equipment. If you have questions about what will disable your
alarm equipment, contact your telephone company or a qualified
installer.
1) Press down on the handset battery case cover (use the finger
indention for a better grip) and slide the cover downward to remove.
2) Plug the battery pack connector (red & black wires) into the small,
black jack inside the battery compartment (the connector notches fit
into the grooves of the jack only one-way). Match the wire colors to
the polarity label in the battery compartment, connect the battery and
listen for a click to insure connection.
into the grooves of the jack only one-way). Match the wire colors to
the polarity label in the battery compartment, connect the battery and
listen for a click to insure connection.
3) Make certain you have made a good connection by slightly pulling on
the battery wires to insure that there is a secure connection.
If the battery connector is not securely connected, the handset will
not charge properly.
If the battery connector is not securely connected, the handset will
not charge properly.
4) Place the battery case cover back on the handset by sliding it
upwards until it clicks into place.
Included with Your Phone
Setting up the Phone
Avoid heat sources, such as
radiators, air ducts, and sunlight
radiators, air ducts, and sunlight
Avoid television sets and
other electronic equipment
other electronic equipment
Choose a central location
Avoid noise sources such as a window
by a street with heavy traffic
by a street with heavy traffic
Avoid microwave ovens
Avoid excessive moisture,
extremely low temperatures,
dust, mechanical vibration,
or shock
extremely low temperatures,
dust, mechanical vibration,
or shock
Avoid personal computers
Avoid other cordless telephones
• Base
• Handset
• Handset
• AC Adapter
• Telephone Cord
• Telephone Cord
• Rechargeable Battery
EXP3240 12/18/2 11:06 AM Page 2