X6D Limited AD025RF Benutzerhandbuch

© XPAND, All Rights Reserved. 

1 

www.xpand.me

(1) Button (ON, OFF, Pairing) – located at the inner side of right earpiece.
(2) LED – located at the outer side of right earpiece, near earpiece hinge.

 

» Shortly press button once.

 

» Red LED will ramp from off to bright.

 

» If glasses cannot fi nd 3D host within few seconds LED will ramp from bright to 

off and glasses will automatically shut down. If glasses fi nd the host they will 
automatically connect to it, indicating by lit LED for 1 second.

 

» Shortly press button once.

 

» Red LED will ramp from bright to off.

 

» Glasses will shut down.

This procedure shall be done every time the glasses are introduced to new RF (radio 
frequency like for example Bluetooth®) 3D host. During the proximity association, 3D 
glasses shall be located within 1m from 3D RF host (3D TV, Emitter…).

 

» Switch on the glasses (1 short press).

 

» LED will ramp from off to bright, indicating glasses power on.

 

» Press button for minimum of 1 second.

 

» After 1 second, LED will start to blink with a rate of 1 blink per 2 seconds. 

 

» Release the button.

 

» Successful proximity association is indicated with 6 short LED blinks.

 

» If glasses could not proximity associate LED will ramp from bright to off and 

glasses will go in power off state.

manual-X105-RF-X1-xpand.indd   1

28.9.2012   9:51:22