X6D Limited AD025RF Benutzerhandbuch

© XPAND, All Rights Reserved. 

4 

www.xpand.me

1. Connect the emitter connector to the corresponding VESA stereo connector in the 
TV or projector.
2. Once the emitter is connected to the TV/projector, please make sure that the TV/
projector is in 3D mode. Check the X sign on the emitter; the red light should be on, 
indicating that the emitter is functioning.
3. For maximum range emitter should not be placed on the ground/floor but should 
be placed at least 10cm above ground (like on a shelf).
The emitter does not require a battery. 

The emitter is connected but the glasses still do not work: Please make sure that 
your glasses are turned ON and that your TV/projector is in 3D mode. If problem 
persists try unplugging the emitter for a couple of seconds and then plug it back in 
the corresponding VESA stereo connector in the TV/projector.

Weight: 2.72 oz (77 g)
Power Supply:  via standard stereoscopic VESA connector
Operating Temperature: 5 °C (41 °F) – 40 °C (104 °F)

 

» Read these instructions.

 

» Keep these instructions.

 

» Heed all warnings.

 

» Follow all instructions.

 

» Do not use this apparatus near water.

 

» Clean only with dry cloth. 

 

» Only use the attachments/accessories specified by the manufacturer.

manual-X105-RF-X1-xpand.indd   4

28.9.2012   9:51:25