Top Victory Electronics Co Ltd SMMTN28C01 External Photos
FCC ID: ARS-SMMTN28C01
Modular Approval Request Letter
Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
October 6, 2016
Dear Application Examiner,
TOP VICTORY ELECTRONICS (TAIWAN) CO., LTD., NFC Controller Module with
Integrated Antenna, FCC ID: ARS-SMMTN28C01
would like to have your
authorization as a modular approval specific to the test host.
The requirements of KDB996369 have been met and shown on the following
statements.
1. “The modular transmitter must have its own RF shielding.” For this application the
radio portion of this module has not been shielded. The module is for limited
modular approval.
modular approval.
2.
“The modular transmitter must have buffered modulation/data inputs.” The EUT
has buffered data inputs, it is integrated in chip NPC100 (U1).
has buffered data inputs, it is integrated in chip NPC100 (U1).
3.
“The modular transmitter must have its own power supply regulation.” The part
number of this regulator is NPC100 (U1).
number of this regulator is NPC100 (U1).
4.
“The modular transmitter must comply with the antenna requirements of section
15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The
spurious emission, unique antenna connector and photo of antennas are shown
in the test report.
15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The
spurious emission, unique antenna connector and photo of antennas are shown
in the test report.
5. “The modular transmitter must be tested in a stand-alone configuration” The EUT
was tested inside a specific platform. Please see section Photographs of Test
Configuration in the test report, the EUT is for limited modular approval for this
specific platform. Please refer to as below for more detail of specific platform.
Configuration in the test report, the EUT is for limited modular approval for this
specific platform. Please refer to as below for more detail of specific platform.