Nokia of America Corporation BBTRX-14 Benutzerhandbuch
Antenna exposure statements
Antenna exposure
Equipment with integrated antennas
This equipment complies with FCC RF radiation exposure limits set forth in 47 CFR Part
1, Subpart I, Section 1.1310 for a general population/uncontrolled exposure environment.
The antenna(s) used for this transmitter shall be installed to provide a separation distance
of at least 20 cm from all persons when they are not co-located or operating in
conjunction with any other antenna or transmitter.
1, Subpart I, Section 1.1310 for a general population/uncontrolled exposure environment.
The antenna(s) used for this transmitter shall be installed to provide a separation distance
of at least 20 cm from all persons when they are not co-located or operating in
conjunction with any other antenna or transmitter.
This equipment is equipped with two integrated quasi-omnidirectional antennas. Any
changes to the antenna or other equipment in the transmit path may require re-evaluation
of the exposures to electromagnetic fields.
changes to the antenna or other equipment in the transmit path may require re-evaluation
of the exposures to electromagnetic fields.
Equipment with external antennas
Antenna installations for this equipment shall be performed in accordance with all
applicable manufacturer's recommendations, and national laws and regulations. To ensure
correct antenna installation, the antenna installer shall perform all necessary calculations
and/or field measurements to evaluate compliance with applicable national laws or
regulations regarding exposure to electromagnetic fields. The supplier of radio
equipment, the supplier of antenna equipment and the integrator and builder of the site
must provide sufficient information so that the limits of the exclusion zones can be
determined. Any changes to the antenna or other equipment in the transmit path may
require re-evaluation of the exposures to electromagnetic fields.
applicable manufacturer's recommendations, and national laws and regulations. To ensure
correct antenna installation, the antenna installer shall perform all necessary calculations
and/or field measurements to evaluate compliance with applicable national laws or
regulations regarding exposure to electromagnetic fields. The supplier of radio
equipment, the supplier of antenna equipment and the integrator and builder of the site
must provide sufficient information so that the limits of the exclusion zones can be
determined. Any changes to the antenna or other equipment in the transmit path may
require re-evaluation of the exposures to electromagnetic fields.
Pursuant to 47 CFR Part 1, Subpart I, subject to the provisions of section 1.1307, all
installations must be evaluated for requirements contained in Table 1, “Limits for
maximum permissible exposure”, in section 1.1310.
installations must be evaluated for requirements contained in Table 1, “Limits for
maximum permissible exposure”, in section 1.1310.
Product conformance statements
United States compliance
United States compliance
Antenna exposure statements
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9763 MCI
3MN-MCI-IMOP
Issue 1
Alcatel-Lucent 9763 MCI
3MN-MCI-IMOP
Issue 1
December 2013
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
B-5